Specialty Terminals 71F-187-20-NL, 72F-187-20-NL W W D Female Disconnect, Nylon Fully Insulated, Butted Seam L Data Sheet Mates with Wire Male Tab Maximum Product Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness WD Length I.D. Diameter 781F-187-20-NL202-101.187 x 0.02 00.803.305.205.205.08 0.14 742F-187-20-NL106-101.187 x 0.02 00.803.305.205.205.08 0.14 Installation Information WARNING UNDERWRITERS Turn power off before installing or removing terminal. All electrical CANADIAN STANDARDS LABORATORIES work should be done according to appropriate electrical codes. ASSOCIATION STANDARD NO. UL 486A STANDARD NO. 22.2 3M FILE NO. E70512 NO. 0.65 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or Specifications TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Insulator Max. Volt Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Barrel Crimp (Electrical) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Plating: Tin Suitable for factory installation on steel or brass tabs. UL and CSA. Suitable for field application on brass tabs, strain relief is required. UL only.Engineering Specification Crimp-Type Female Disconnects shall, electrically and The Nylon Fully Insulated 0.187 Female Disconnect mechanically, connect permanently to the prestripped shall be tin plated 0.016 thick brass, with a tongue end of a stranded copper wire, and have a tongue for gripping a 0.187 x 0.020 Male Tab, per portion with fingers which grip a Male Quick Slide in ANSI/NEMA CD-2 and a 0.250 long barrel covered a separable, reusable manner, forming a Quick by a molded nylon funnel entry sleeve, which extends Connect Wiring Termination. to cover the tongue, color coded and sized for a specified (AWG) wire range (Red, 22-18: Blue, The connector line shall offer a tongue variations 16-14). (sized to grip male tabs: 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA CD-2) and barrel variations Insulated connectors shall be UL Listed and CSA in wire (AWG) size (22-18, 167-14, 12-10) and Certified for 600 V building wire 1000V signs or construction, non-insulated, vinyl insulated, nylon fixtures (luminaires) and temperature rated 221F fully, etc. The Female Disconnects shall have (105C) maximum. regulatory agency coverage, UL Listing, CSA Certification. The tongue portion shall be marked with Female Disconnects shall be suitable for field or the wire range and manufacturers symbol ( ). factory wiring, with a UL Recognized strain relief required. 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.