3M 4-Wall, Tripolarized Header .050 .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications Available for through hole or surfacemount attachment High temperature plastic for lead free surfacemount or Paste-in-Hole soldering methods Four-wall shroud provides contact protection Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information Date Modifi ed: April 2, 2013 TS-0253-K Sheet 1 of 7 Physical Insulation: Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 100 2.54 mm Nickel Wiping Area: 30 0.76 mm Gold Solder Tails: Matte Tin or Tin Lead (See Ordering Information) 3M Logo, Part Number and Orientation Triangle Marking: Mating Compatibility: 820 Series (TS-0254) Electrical Current Rating: 3.00 A, 1 Contact Powered 2.00 A, 4 Contacts Powered 0.75 A, All Contacts powered Rating Conditions: EIA-364-070 Method 2, 30 degrees C maximum temperature rise, 20% derated. Reference appropriate 3M Product Speci cation for detailed current derating curves. 9 > 1 10 at 500 V Insulation Resistance: DC Withstanding Voltage: 500 V at Sea Level RMS Environmental Temperature Rating: -55C to +105C Maximum 260C (Pro le per J-STD-020C) Process Rating: 1 (per J-STD-020C) Moisture Sensitivity Level: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M 4-Wall, Tripolarized Header .050 .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 1 Inch Imm C Dimensions Tolerance Unless Noted Contact D Short D Long Quantity A B C .0 .00 .000 (Ref.) (Ref.) Inch .1 .01 .005 1.060 0.722 0.500 1.671 1.842 020 Dimensions for Reference Only 26.92 18.34 12.70 42.44 46.79 1.210 0.872 0.650 1.821 1.992 026 30.73 22.15 16.51 46.25 50.60 1.460 1.122 0.900 2.071 2.242 036 37.08 28.50 22.86 52.60 56.95 A 1.560 1.222 1.000 2.171 2.342 040 B 39.62 31.04 25.40 55.14 59.49 C 1.810 1.472 1.250 2.421 2.592 050 .015 X .015 45.97 37.39 31.75 61.49 65.84 0.38 X 0.38 2.060 1.722 1.500 2.671 2.842 060 2X .092 52.32 43.74 38.10 67.84 72.19 See Note 1 2.34 2.260 1.922 1.700 2.871 3.042 Position 2 068 57.40 48.82 43.18 72.92 77.27 2.560 2.222 2.000 3.171 3.342 080 65.02 56.44 50.80 80.54 84.89 3.060 2.722 2.500 3.671 3.842 100 .310 77.72 69.14 63.50 93.24 97.59 Position 1 7.87 .100 Ref .015 X .015 2.54 0.38 X 0.38 Table 2 .050 Typ 1.27 PCB Thickness Solder Tail Length .010 .062 1.57 .090 2.29 .094 2.39 .112 2.84 .125 3.18 .143 3.63 D Long Latch Short Latch .440 .010 .165 .010 11.18 4.19 2X .116 .105 2.95 .828 Ref 2.67 21.03 .160 Ref .265 .620 Ref 4.06 .405 6.73 15.75 10.29 .306 Ref 7.77 .140 .010 3.56 .015 Position 1 0.38 Orientation Triangle Notes: F (See Table 2) 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050 X .100 Wiremount Socket 820 Series. Notes: Ordering Information PTH Right Angle Header 81XXX - 5X0X03 - XX Ejector Latches (If Ordered Separately) Plating suffix: Contact Quantity blank = 125 tin lead tails (RIA E3 & C2 apply) (See Table 1) Long Latches RB = 250 matte tin tails (RIA E1 & C1 apply) 3505-28B (black) Contact Tail: Short Latches 2 = Solder Tail for .062 1.57 PC Board (Standard) Ejector/Latch System: 3 = Solder Tail for .094 2.39 PC Board (Special Order) 3505-29B (black) 0 = None (Special Order) 4 = Solder Tail for .125 .318 PC Board (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) TS-0253-K Sheet 2 of 7 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions