9472LE (12.5mm X 55m) 3M

ASK A 3M EXPERT September, 2017 3M Adhesive Transfer Tape 9472LE Product Description 3M Adhesive Transfer Tapes with 3M Low Surface Energy Acrylic Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts. Product Features 3M Adhesive 300LSE is a hi-strength acrylic adhesive that provides a very high bond strength to most surfaces. Excellent bond to low surface energy plastics such as polypropylene and powder coatings. Excellent adhesion to lightly oiled surfaces typical of machine parts. Thickness range of 2.3, 3.6 and 5.2 mils for use on smooth, or rough surfaces.3M Adhesive Transfer Tape 9472LE Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for speci cation purposes. Typical Physical Properties Property Values Adhesive Type 3M High Strength Acrylic Adhesive 300LSE Adhesive Thickness 0.132 mm 5.2 mil Liner 58 Polycoated Kraft Liner Thickness 0.107 mm 4.2 mil Typical Performance Characteristics 90 Peel Adhesion Dwell/Cure Time Substrate 11.9 N/cm 109 oz/in 15 min Room Temperature Stainless Steel 12.6 N/cm 115 oz/in 15 min Room Temperature Polypropylene (PP) 11.2 N/cm 102 oz/in 15 min Room Temperature ABS 15.3 N/cm 140 oz/in 72 hr Room Temperature Stainless Steel 14.9 N/cm 136 oz/in 72 hr Room Temperature Polypropylene (PP) 14 N/cm 128 oz/in 72 hr Room Temperature ABS Property: 90 Peel Adhesion Method: ASTM D3330-F Backing: 2 mil Aluminum Foil Available Sizes Property Values Normal Slitting Tolerance 0.8 mm 1/32 in Minimum Slit Width 12.7 mm 1/2 in Maximum Slit Width 1219 mm 54 in Core Size (ID) 76.2 mm 3 in Limitations 1/2 in to 63/64 in: Maximum 180 yd (165 m) 1 in to 54 in: Maximum 360 yd (329 m)