3M Shielded Controlled Impedance (SCI) .100 Cable Assemblies .100 inch (2.54 mm) center spacing Mates with standard 3M two-pin headers Supplied as a completed assembly Stand-Alone version Available in right angle and straight configurations with optional polarization feature Right angle connector has optional two-pin header latch Carrier version Available only in straight configuration designed for use with the 3M SCI carrier system Date Modified: September 23, 2005 TS-0803-05 Sheet 1 of 3 Physical (Connector Insulation) Material: Thermoplastic Flammability: UL 94V-0 (Connector Contact) Material: Beryllium Copper Plating: 50/50 Au/Ni (1.27/1.27 m Au/Ni) (Connector Shieldbox) Material: Copper Zinc Alloy Plating: Solderable Nickel Electrical Current Rating: 1 A 9 Insulation Resistance: >5 x 10 Withstanding Voltage: 500 V AC Characteristic Impedance: See cable types Mechanical Center Spacing: .100 (2.54 mm) Mating Pin Dimensions: .024 min/.026 max (0.61 mm/0.665 mm) Mating Pin Length 20, 21, 22, 23: .23 nom (5.80 mm) 24: .21 nom (5.02 mm) Contact Mating Point 20, 21, 22, 23: .13 (3.40 mm) 24: .10 (2.60 mm) Connector Insertion Force: 2.3 N max Pin:0.025 (0.63 mm) Connector Withdrawel Force: 1.5 N min Pin:0.025 (0.63 mm) Cable Retention Force: 50 N min Durability (Insertion/Withdrawal): 500 cycles Environmental Temperature Rating: 22, 23: -55 to +105C 24: -55 to +125C UL File No.: E86982 (Optional) 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Shielded Controlled Impedance (SCI) .100 Cable Assemblies Connector Types Carrier Version Type 24 Stand Alone Version Type 23 .604 15.35 .604 15.35 .082 .174 4.43 2.08 .174 4.43 .088 2.25 Ground .11 2.80 .012 0.30 Signal .073 Ground 1.85 .100 2.54 .039 1.0 Signal .100 2.54 Inch mm Tolerance Unless Noted .0 .00 .000 Inch .1 .005 .01 Right Angle Version Type 22 Dimensions for Reference only .063 1.60 .472 12.00 Example Assembly .174 4.43 .088 2.25 .012 0.30 Ground Length Assembly Tolerances: <10:1/4 .039 1.0 10 to 36: 1/2 Signal .100 2.54 36 to 120: 1 >120:2 Minimum Length: 4.3 Ordering Information 98XXXX-XXX-XXX.X-X X X USA and Canadian Certification Left Connector Type/Right Connector Type Y = Yes 22 = Right angle, nonpolarized N = No 23 = Straight, nonpolarized 24 = Carrier version, straight Ground Pattern Length S = Signals as indicated on connector dwg Cable Type (inches) Z = Customer special ground pattern 017 = 50 027 = 50 Low capacitance (Consult Factory) 041 = 75 XXX = For other cable options Harness Required contact 3M (if non standard) A = Multiple Assy s Harnessed 0 = Single Assembly Only TS-0803-05 Sheet 2 of 3 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call