1182 Tape Copper Foil Conductive Adhesive on Both Sides Data Sheet Product Description Applications 3M 1182 is typically used to bond two surfaces together, 3M 1182 Tape consists of a 1-ounce deadsoft copper foil backing that is coated on both sides with a both electrically and physically. An example would be adhering a conductive gasket to a conductive surface as unique electrically conductive pressure-sensitive acrylic part of the EMI shielding solution for an electronic adhesive. enclosure. Deadsoft 1-ounce copper foil backing Conductive acrylic adhesive on both sides Conductivity Supplied with removable liner on both sides for easy handling and diecutting Since 3M 1182 double-sided copper tape would typically be used as an electrical path between two Like all 3M shielding tapes, 3M 1182 is available in surfaces, its most important feature is its conductivity. standard and custom widths and lengths. Standard length Highly conductive particles in the acrylic adhesive is 18 yards. provide a multitude of electrical paths between the application substrate and the surface of the copper foil on Widths from 1/4 to 23 each side. The resistance of the conductive path through 2 Longer lengths up to several times normal length, the adhesive (measured over a 1-in area) typically dependent upon width. Check with Customer Service. measures only a few milliohms. Properties Typical Values 1 Backing thickness 1.4 mil (0,04mm) 3 Total thickness (backing plus adhesive on both sides) 3.5 mil (.088mm) 1 Breaking strength 25 lb./in (44 N/10mm) 1 Adhesion to steel 35 oz/in (3,8 N/10mm) 2 Electrical resistance through adhesive 0.010 ohm 3 Flame retardancy Pass * Footnote: 1. Test method ASTM D 1000 2 2 2. MIL-STD-202 Method 307 maintained at 5 psi (3,4 N/cm ) measured over 1 in surface area. Conductive particles in the adhesive provide the electrical path between the application substrate and the foil backing. 3. UL-recognized for flame retardancy per UL 510, Product Category 0ANZ2, File E17385.Important Notice If any goods supplied or processed by or on behalf of 3M prove on Technical information provided by 3M is based on experience and/or tests inspection to be defective in material or workmanship, 3M will (at its believed to be reliable, but their accuracy is not guaranteed and the results may option) replace the same or refund to the Buyer the price paid for the not be relevant to every users application. For this reason 3M does not accept goods or services. Except as set our above, all warranties and responsibility or liability, direct or consequential, arising from reliance upon any conditions, whether express or implied, statutory or otherwise are information provided and the user should determine the suitability of the products excluded to the fullest extent permissible at law. for their intended use. Nothing in this statement will be deemed to exclude or 3M and Scotchcast are trademarks of the 3M Company. Printed in restrict 3Ms liability for death or personal injury arising from its negligence. All the UK. questions of liability relating to 3M products are governed by the sellers terms of 3M United Kingdom PLC, 1999 sale subject where applicable to the prevailing law 3M Ireland 3M United Kingdom PLC Electrical products Group Electrical Products Group Innovation 3M House, Adelphi Centre Hudson Road Jan. 2000 Dun Loaghaire, CO. Dublin, Ireland Bedford MK41 0HR Tel: (01) 2803555 Tel: 01234 268868 Fax: (01) 2803509 Fax: 01234 229433