Specialty Terminals W W HT-72F-187-20, HT-72F-250-32 Female Disconnect, High Temperature, L L Non-Insulated, Butted Seam HT-72F-187-20 HT-72F-250-32 Data Sheet Wire Mates with Range Width (W ) Male Tab Barrel Barrel Product Number (AWG) x Thickness L Length I.D. H4T-72F-187-20106-108.187 x 0.02 05.5 05.2 0.08 H4T-72F-250-32126-104.250 x 0.03 03.6 05.2 0.09 Specifications Installation Information Wire Size: See Table Above Barrel Seam: Butted WARNING Maximum Operating Temp: 900F (482C) Turn power off before installing or removing terminal. All electrical Maximum Current: Same as Wire work should be done according to appropriate electrical codes. Terminal Material: Steel Plating: Nickel For use on stranded copper wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical)Engineering Specification Crimp-Type Female Disconnect Terminals shall, The non-insulated high temperature 0.187 female quick- electrically and mechanically, connect permanently to the slide shall be nickel-plated 0.016 thick steel, with a prestripped end of a stranded copper wire, and have a tongue for gripping a 0.187 wide x .020 male tab, and a tongue portion with fingers which grip a Male 0.25 long butted seam barrel, sized for a specified Disconnect in a separable, reusable manner, forming a (AWG) wire range (16-14). Quick Connect Wiring Termination. The non-insulated high temperature 0.250 female quick- slide shall be nickel-plated 0.019 thick steel, with a tongue for gripping a 0.25 wide x 0.030 or 0.032 male tab, and a 0.23 long butted seam barrel, sized for a specified (AWG) wire range (16-14). 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.