Meets ANSI/ESD S20.20 and Grounding standard ANSI/ESD S6.1. Description With a low-profile top, this common point ground cord connects two wrist straps and a work surface to ground, helping ensure that all parts are at the same ground potential. Easy to install. Simply snap it to a mat or work surface. Plug in the wrist strap coil cord, and connect the ring terminal to ground. Provides holes for permanent mounting to a bench. Specifications Length 15ft Snap Stud 10mm Ground Connection 10 Ring Terminal Resistor 1 Megohm Color Black Item Description LPCGC151M Low-Profile Common Ground Cord Made in Taiwan Unless otherwise noted, tolerance 10% Specifications and procedures subject to change without notice. LOW- PROFILE COMMON GROUND CORD, 1 MEG RESISTOR, 15FT DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 NUMBER March WEB SITE: StaticControl.com PHONE (919) 718-0000 2016 LPCGC151M 2016 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by 3M manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260