M14-8R/LX 3M

W Scotchlok Terminals C L E M18-4R/S thru M10-12R Ring Tongue, Non-Insulated, Brazed Seam Data Sheet Wire Product Range Stud Barrel Barrel Number (AWG)SWize C L E Thickness Length I.D. M818-4R/S222-1 02.2500.207.600.405.03 00.2 0.07 M818-6R/S262-1 02.2500.207.600.405.03 00.2 0.07 M818-8R/L 282-1 03.3104.308.700.505.03 00.2 0.07 M818-10R/L202-1 1103.304.308.700.505.03 00.2 0.07 M818-14R/S 22-1 00.4709.405.800.605.03 00.2 0.07 M818-516R/S 22-1 00.4702.405.800.605.03 00.2 0.07 M818-38R 22-1 00.5603.405.900.605.03 00.2 0.07 M414-2R/S 126-1 02.2500.207.600.405.03 00.2 0.09 M414-4R/S 146-1 02.2500.207.600.405.03 00.2 0.09 M414-6R/S 166-1 02.2500.207.600.405.03 00.2 0.09 M414-6R/L 166-1 03.3104.308.700.505.03 00.2 0.09 M414-8R/L 186-1 03.3104.308.700.505.03 00.2 0.09 M414-10R 106-1 1309.300.204.700.505.03 00.2 0.09 M414-10R/L106-1 1103.304.308.700.505.03 00.2 0.09 M414-14R/S 16-1 00.4709.405.800.605.03 00.2 0.09 M414-516R/S 16-1 00.4709.405.800.605.03 00.2 0.09 M414-38R 16-1 00.5603.405.900.605.03 00.2 0.09 M010-4R/S 142-1 09.2808.204.600.505.04 05.2 0.13 M010-6R 162-1 09.3803.204.700.505.04 05.2 0.13 M010-8R 182-1 09.3803.204.700.505.04 05.2 0.13 M010-10R 102-1 1809.303.204.700.505.04 05.2 0.13 M010-14R/S 12-1 04.5406.409.900.605.04 05.2 0.13 M010-516R/S 12-1 04.5406.409.900.605.04 05.2 0.13 M010-38R/S 12-1 04.5406.409.900.605.04 05.2 0.13 M010-12R 12-1 07.7509.512.100.805.04 05.2 0.13Engineering Specification Crimp-type terminals shall, electrically and mechanically, connect to a pre-stripped end of a CANADIAN STANDARDS stranded copper wire: and have a flat tongue portion UNDERWRITERS ASSOCIATION LABORATORIES with a central opening for mounting around a screw or STANDARD NO. C22.2 STANDARD NO. UL 486A stud. NO. 0. 65 3M FILE NO. E23438 3M FILE NO. LR22190 The terminal line shall offer tongue variations in hole Specifications (stud) size (6, 8 10, etc.) and configuration (ring, fork, Wire Size: See Table Above block fork, flanged block fork, locking fork, etc.): and Barrel Seam: Brazed barrel variations in wire (AWG) size (22-18, 16-14, Max. Temperature Rating: 347F (175C) 12-10, etc.) and construction (non-insulated brazed Max. Current: Same as Wire seam, vinyl insulated butted seam, nylon insulated Terminal Material: ETP Copper Terminal Plating: Tin with insulation grip, etc.). The terminal line shall have regulatory agency coverage (UL Listing, CSA Certification). The terminal tongue shall be marked Installation Information with the wire range and manufacturers symbol ( ). WARNING The non-insulated, brazed seam ring, tongue terminal shall be tin-plated, annealed copper, with the tongue Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. having a specified stud hole (size 2 thru 1/2 in.) and a brazed seam barrel with a beveled I.D. for ease of stranded wire entry, sized for a specified (AWG) wire UL Listed and CSA Certified for use on stranded copper (AWG) wire only. range (22-18, 16-14, 12-10). Strip away the end 3/8 inch of wire insulation. Non-insulated terminals shall be UL Listed and CSA Make the crimp in the proper station of a recommended Certified. 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical) 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.