Safety Light Grid Orion3 Extended Orion3 Extended is a sturdy light grid for access protection in muting applications. Only one of the units needs power supply, since both transmitter and receiver are in the same active unit. The other unit is a passive unit containing mirrors to reflect the beams. With 2-4 beams and an operating range of up to 8 m, it is intended for body detection. Cost effective solution Easy to install Continuous operation Integrated muting function Alignment help Visible alignment level Muting sensors are connected directly to Alignment help and a wide angle within Since the alignment level is displayed, the light grid, with no need for a remote the limits of a Type 4 device facilitate the alignment can be improved before muting module. installation. the occurrence of an unwanted stop. Minimized cabling Easy adjustment Extensive error indication A local reset button can be connected Rotation brackets makes alignment Extensive error indication reduces directly to the light grid, eliminating the easy. tr ouble shooting time. need for cable between the reset button and the electrical cabinet or for an extra Fast connection control module. M12 connectors speed up cabling. External device monitoring Less cabling Each light grid can monitor the actuators Only the active part needs connecting. without any extra control module (EDM function).Applications and features Orion3 Extended Application Muting Orion3 Extended is intended for muting applications. By con- necting muting sensors to the light guard, it can distinguish material from persons and allow the material to pass through an opening but not persons. Muting sensors and a connection box for muting are available to simplify the muting application. Features Power on one side Sturdy profile for demanding applications Both transmitter and receiver are in one active unit, and the With its thicker and sturdier profile is is suitable for applica- other unit is a passive unit with mirrors. This simplifies instal- tions with tougher requirements. lation and saves cables, making it easier to place in applica- tions where cables needs to be avoided. EDM Local reset External Device Monitoring is a feature allowing the light guard A local reset button is connected directly to the light guard to supervise the actuators in simpler applications, eliminating instead of the safety control module in the electrical cabinet. the need for a safety relay or safety PLC. This saves safety relays/PLC inputs and minimizes cabling to the electrical cabinet. Clever accessories makes the connec- tion easier. 2 Orion3 Extended I ABB