Datasheet GE 9Vdc 36Vdc input +15V, -15V Dual Output, 0.3A 9W Output SHHN000A3 HAMMERHEAD* Series DC-DC Converter Power Modules Features Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863.(-Z versions) Compliant to REACH Directive (EC) No 1907/2006 Wide Input Voltage Range, 9Vdc to 36Vdc No minimum load for no damage operation Constant switching frequency Low output ripple and noise Small Size and low profile, follows industry standard 1x1 RoHS Compliant footprint 27.9mm x 24.4mm x 8.5mm (MAX) (1.10 x 0.96 x 0.335 in) Surface mount (SMT) or Through hole (TH) Applications Reflow process compliant, both SMT and TH versions Hybrid power architectures Positive and Negative Remote On/Off logic Industrial markets Output overcurrent, overvoltage protection Over-temperature protection Wide operating temperature range (-40C to 85C) ANSI/UL* 62368-1 and CAN/CSA C22.2 No. 62368-1 Recognized, DIN VDE 0868-1/A11:2017 (EN62368- 1:2014/A11:2017) CE mark meets 2014/35/EU directive Withstands 1600Vdc Isolation Voltage. ** ISO 9001 and ISO 14001 certified manufacturing facilities Description The SHHN000A3A HAMMERHEAD* series power modules are isolated dc-dc converters that designed to operate over a wide input voltage range of 9 Vdc -36Vdc and provide a set of regulated dual polarity output voltages at +15.0Vdc and -15.0Vdc. The outputs are fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit a minimum efficiency of 84.0% at full load and nominal input. Built-in filtering for both input and output minimizes external filtering components. The module is fully self-protected with output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include negative or positive on/off logic and SMT connections. *Trademark of General Electric Corporation UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF) April 30, 2021 2014 General Electric Company. All Rights reserved. Datasheet GE SHHN000A3 Series DC-DC Converter Power Modules 9Vdc 36Vdc input +15V, -15V Dual Output, 0.3A 9W Output Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings will cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not desired at these or any other conditions in excess of those given in the operations sections of the Datasheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage (Continuous) All V -0.3 40 Vdc IN Transient (1s) No damage All V -0.3 50 Vdc IN, trans Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg 4000 Altitude All m 1600 I/O Isolation Voltage (100% factory Hi-Pot tested) All Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions . Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 9 36 Vdc IN Maximum Input Current All I 1.3 Adc IN (V =9 to 36V, I =I , I =I ) IN O1 O, max, O2 O2 max, Input No Load Current V = ON I 30 mA O1,02 IN,No load (VIN = 24Vdc, IO = 0, module enabled) Input Stand-by Current All I 9 mA IN,stand-by (V = 24Vdc, module disabled) IN 2 2 Inrush Transient All I1 t 0.05 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1H source impedance VIN =0 to 36V, IO1 All 30 mAp-p &02= IOmax See Test Configurations) Input Ripple Rejection (120Hz) All 40 dB April 30, 2021 2014 General Electric Company. All Rights Reserved Page 2