SM CONNECTOR SM CONNECTOR 2.5 mm pitch/Disconnectable Crimp style wire-to-wire connectors Specifications Current rating: 3 A AC/DC max. SM CONNECTOR SM CONNECTOR Voltage rating: 250 V AC/DC max. Temperature range: -25 to +85 (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 500 M min. Withstanding voltage: 1,500 VAC/minute Applicable wire: AWG 28 to 22 2 0.08 to 0.33 mm Applicable panel thickness: 0.5 to 2.0 mm * In using the products, refer toHandling Precautions for Terminals The SM series are 2.5 mm pitch, and Connector described on our website (Technical documents wire-to-wire connectors that perform reliably of Product information page). in high-density, small current applications. * RoHS2 compliance * Dimensional unit: mm * Contact JST for details. High contact pressure Highly reliable housing construction Standards Mountable on a variety of panels Recognized E60389 Arm lock mechanism R50120150 Panel Layout and Assembly layout (22.9) SM2 +0.15 <2 to 12 circuits> 4 0 Panel thickness (mm) 0.50.9 1.01.5 1.52.0 No. of Model No. circuits Plug housing Panel hole dimensions (mm) General tolerance 0.15 0.15 0.15 0.1 0.1 0.1 A A 0 B A 0 B A 0 B 2 SMP-02V-B(N)C 5.7 9.6 5.7 9.8 5.7 10.0 B 3 8.2 12.1 8.2 12.3 8.2 12.5 SMP-03V-B(N)C 4 SMP-04V-B(N)C 10.7 14.6 10.7 14.8 10.7 15.0 +0.15 <18 circuits> 7 0 5 SMP-05V-B(N)C 13.2 17.1 13.2 17.3 13.2 17.5 6 SMP-06V-B(N)C 15.7 19.6 15.7 19.8 15.7 20.0 7 18.2 22.1 18.2 22.3 18.2 22.5 SMP-07V-B(N)C 8 SMP-08V-B(N)C 20.7 24.6 20.7 24.8 20.7 25.0 9 SMP-09V-B(N)C 23.2 27.1 23.2 27.3 23.2 27.5 10 SMP-10V-B(N)C 25.7 29.6 25.7 29.8 25.7 30.0 11 28.2 32.1 28.2 32.3 28.2 32.5 SMP-11V-B(N)C 12 SMP-12V-B(N)C 30.7 34.6 30.7 34.8 30.7 35.0 A 18 SMP-18V-B(N)C 23.2 27.2 23.2 27.4 23.2 27.6 B Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 212 circuits8.7 18 circuits14.5 +0.15 4.15 0 +0.15 7.15 0 +0.15 5.15 0 1.6 +0.15 10.15 0 1.41 3 4 5 6 7 10 12 13 14 15 18 JST 1 2 3 4 12 SMSM CONNECTORCONNECTOR SM CONNECTORSM CONNECTOR 2.5 mm2.5 mm pitch pitch//Disconnectable Crimp style wire-to-wire connectorsDisconnectable Crimp style wire-to-wire connectors SM SM CONNECTORCONNECTOR SM CONNECTORSM CONNECTOR Contact Pin contact Socket contact 9 15.8 3.8 1.7 2.3 1.7 2 SM1 Model No. Applicable wire Insulation O.D. Qty/reel 2 Pin contact Socket contact mm AWG (mm) Pin contact: 8,500 SYM-001T-P0.6 SHF-001T-0.8BS 0.080.33 2822 1.21.8 Socket contact: 5,000 Material and Finish Phosphor bronze, tin-plated (reow treatment) RoHS2 compliance Note: 1. Contact JST for special products. 2. Contact JST for brass products. Applicator Applicator Crimping Crimping Contact Contact machine Crimp applicator Dies Crimp applicator with dies machine Crimp applicator Dies Crimp applicator with dies SYM-001T-P0.6 AP-K2N MKS-L MK/SYM-001-06 APLMK SYM001-06 SHF-001T-0.8BS AP-K2N MKS-L MK/SHF-001-08S APLMK SHF001-08S Note: Contact JST for fully automatic crimping applicator. Note: Contact JST for fully automatic crimping applicator. Contact position location numbers Contact position numbers are stamped Receptacle housing Plug housing Receptacle housing Plug housing 1 1 2 2 1 10 10 1 3 3 2 11 11 2 4 4 3 12 12 3 5 5 4 13 13 4 6 6 5 14 14 5 7 7 6 15 15 6 8 8 7 16 16 7 9 9 8 17 17 8 10 10 9 18 18 9 11 11 12 12 2 0.64 1.1 JST 1.95 12 11 4 3 2 1 3 1.1 9 5 4 1 18 15 14 13 10 JST