IoT CONTROL RELAY
Safely control AC power from logic.
A single logic input signal controls one high-current
Build the IoT. Connect easily and safely. Control power
SPDT AC relay. This relay signal switches four AC
from an Arduino, Raspberry Pi, Galileo or other micro-
outlets in pairs: Two outlets are normally on. Two are
controller. The universal input connects to any circuit
normally .
including 3.3V and 5 volt logic. No driver is requried.
The universal control voltage 3-48VDC or 12-120VAC
Simply connect two wires. One to ground and one to
your control signal, such as an output bit on a micro- allows control from virtually any micro or AC source.
controller.
Self-contained design eliminates dangerous high volt-
The relay can also be controlled by an AC input voltage age wiring and safety hazards.
of 12 to 120VAC. No changes or jumpers are required.
Safety features include:
The internal circuitry is very power e cient, using
Optical isolation -- eliminates shock hazard
approximately 1/5W unswitched and 1.1W activated.
Relay hysteresis -- prevents relay chatter
Applications include:
De-bounce protection -- extends contact life
LEDs -- verify input voltage and switch state
IoT products, DIY gadgets, OEM test equipment
Home and building automation
A large 3600W MOV clamps surges for clean power.
Green power and energy conservation
The durable SPDT control relay is rated at 30/40A,
Kiosks, vending machines and signage controls
400,000 operations at 12A resistive. At no load, the
Multiple AC loads of up to 12 Amps total may be con-
estimated lifetime is 5.3 million mechanical operations.
trolled. Your imagination is the limit.
A 12A thermal safety circuit breaker switch prevents
The IoT control relay is rugged and reliable, with US
overloads and adds supplemental protection.
design and QC. It ships fully assembled and tested with
Recommended operating range: AC input 90-120VAC.
a 1 year warranty. Single units are available on Amazon.
Current 0-8A with 18AWG power cords, 0-12A with
Call DLI for quantity discounts and overnight shipping.
16AWG cord. Use14AWG for 12A spans over 10 feet.
Input connector: C-13/C14. Output: 4x NEMA 5-15.
Included cord: 24" C-13 to 5-15 16AWG. Cords up to 50'
length are in-stock in 14AWG.
Indoor use only: -35F to 145F, 5-95% noncondensing.
Digital Loggers, Inc.
2695 Walsh Avenue, Santa Clara, CA 95051
Tel: (408) 330-5599 IoTrelay.com
1999-2016 DLI. US & foreign patents pending.X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Adafruit Accessories category:
Click to view products by Adafruit manufacturer:
Other Similar products are found below :
3015 3209 2998 3561 2974 3182 3290 2755 3560 3562 2503 3548 3011 3597 3048 2776 3299 2973 2922 2958 2860 2836 3558
2686 2968 2972 2969 2871 2851 2873 2895 3610 2939 2698 3568 2869 2866 3551 2858 2855 3590 3447 3581 3353 2744 3585
3584 3552 3484 2865