PCI-7856

Motionnet PCI-7856 Master-Slave Distributed Motion & I/O Master Controller Introduction The PCI-7856 is a PCI interface card which offers two ports for Motionnet and HSL systems for distributed mo- tion and I/O in machine automation applications. HSL technology allows thousands of I/O points to be scanned at the millisecond-level in real time by using mater-slave architecture. Commercial Ethernet cables with RJ45 connector are used for simplified setup of the HSL slaves modules as close as possible to sensor devices which results in a dramatic reduction of wiring. System integrators can benefit from HSL network because it integrates discrete I/O and analog I/O modules. This local network features rapid response, real-time scanning. Features Specifications Connect I/O points up to 2,016 points Connect motion axis up to 256 axes Bus PCI local bus specification Rev. 2.1 compliant Programmable timer interrupt Master Controller Dedicated Motion Controller: RJ-45 jack for easy installation Motionnet ASIC master control (80 MHz external clock) Software selectable transmission speed: 3/6/12 Mbps for HSL Dedicated I/O Controller: Software selectable transmission speed: 2.5/5/10/20 Mbps HSL ASIC master control (48 MHz external Clock) for Motionnet Interface Motionnet Non-volatility RAM onboard RS-485 with transformer isolation Half duplex communication Software Support 2.5/5/10/20 Mbps transmission rate can be set by software (20 Mbps default) OS Information HSL Windows 8/7/XP RS-485 with transformer isolation Full duplex communication RTX 5.x/6.x/8.1a 3/6/12 Mbps transmission rate can be set by software (6 Mbps default) Software Compatibility Connector RJ45 connector x 4 (MRJ45 connector for Motionnet HRJ45 connector for HSL) VB/VC++/BCB/Delphi Interrupt Status read back Various sample programs with source codes LED Indicator Link status (Red for Motionnet Link status Green for HSL Link status) Storage Temperature -20C to +80C (-4F to 176F) Software Recommendations Power Consumption +3.3 V 1.2 A (typical) MotionCreatorPro2 +5 V 1.5 A (typical) Dimensions 119.5 mm x 100.2 mm (L x W) (4.66 x 3.9) Ordering Information PCI-7856 Master-slave distributed motion & I/O master controller Updated January 29, 2013. 2013 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Interface Modules category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : 8500-003 IFD8520 cPCI-3544 422CON ATX6022/14GP7 ATX6022/8 AX93221-24/48 FC6A-EXM2 OPT8AP-AE 96RMKVM-19V1C-A 60016-011 60016-014 60006-008 60011-075 HPCI-14S12U cBP-3208 cBP-3062A FAB205-6P5 ATX6022/6 60016-012 96RMKVM- 17V1C-A PCE-DP10-00A1E MOS-1120Y-0201E 96RMLCD-17V1-A 96RMKVM-17V8C-A 60004-005 60016-017 60006-009 60016-035 60016-034 60016-031 60016-030 60016-026 60016-024 60016-018 60016-007 60016-005 60007-002 60006-010 AXX10GBTWLHW3 382-BBEH 555-BDCL K6CMISZBI52 426451401-3 60011-093 MIC-3620/3-BE MPCIE-UART-KIT02-R20 RSM232 PCIE-1680-AE BB- FOSTCDRI