High-Speed DIO PCIe-7350 50 MHz 32-CH High-Speed Digital I/O Card Specifications Terminal Boards & Cables DIN-68H-01 Digital I/O Terminal Board with One 68-pin SCSI-VHDCI Number of channels: Connector and 0 or 50 Jumper Selectable 32, per group (8-channel) input/output direction Impedance (Cables are not included. selectable ACL-10279 Logic levels: 1.8 V, 2.5 V, 3.3 V (software selectable) Power-up status: All digital inputs 68-pin SCSI-VHDCI Cable with 50 Impedance Impedance: SMB-SMB-1M Input: 10 k SMB to SMB Cable, 1M Output: 50 * For more information about mating cables, please refer to Input protection: -1 to 6 V P3-48/49. Data transfer: Programmable I/O, bus-mastering DMA with scatter-gather Ordering Information Maximum data transfer rate: 200 MB/s Features Digital logic levels: x1 lane PCI Express Interface PCIe-7350 50 MHz 32-CH High-Speed Digital I/O PCI Logic Levels 1.8 V 2.5 V 3.3 V Maximum 50 MHz clock rate from internal timer or Min. input high voltage 1.2 V 1.6 V 2 V Express Card 100 MHz from external clock Digital Input Max. input low voltage 0.63 V 0.7 V 0.8 V 200 MB/s maximum throughput Min. output high voltage 1.6 V 2.3 V 3.1 V Software selectable voltage level of 1.8 V, 2.5 V, and 3.3 V Digital Output Max. output low voltage 0.2 V 0.2 V 0.2 V Max. output driving current 8 mA 16 mA 32 mA 16-steps phase shift in external clock mode Per group (8-Bit) input/output direction selectable Clocking mode 2 Supports I C and SPI programmable serial interfaces for Internal clock: Max. 50 MHz (100 MHz / N external device communication 2<N<65535) Scatter-gather DMA support External clock: Max. 100 MHz (support 8/16-Bit Flexible handshaking and external digital trigger modes data width only, data throughput must be less than 8-channel auxiliary programmable I/O 200 MB/s) Supported Operating System Handshaking Windows 7/8 x64/x86, Linux Burst handshaking Driver and SDK Trigger sources LabVIEW, MATLAB, C/C++, Visual Basic, Software trigger Visual Studio.NET External digital trigger: AFI 07 Trigger modes Post trigger, Retrigger, Pattern match, Handshaking Change of State Interrupt Interrupt sources: Any of 32 channels or a pre-define channel Change-of-State Application Function I/O Number of channels: 8 2 Supporting modes: static I/O, I C or SPI master node, external clock input/output, external digital trigger input, handshaking 3-34 Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE LPCI-7230 USB-4761-BE SE028 PCI-1761-BE AR207/8/S1/PPPP/IP65 PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE PCIE-1810-AE PCI-1710U-DE PCI- 1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 EL-USB-5 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-9111DG PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB-1903 USB-2401 PCIE-1813-AE PCIE-1816-AE PCIE-1816H-AE PCIE-1884-AE USB-5856-AE USB-5862-AE AR654/S2/P/P/P/P/IP30 DAS30 DAS60