Digitizers PCIe/PXIe-9842 1-CH 14-Bit 200 MS/s High-Speed PCI Express /PXI Express Digitizers Introduction The ADLINK PCIe/PXIe-9842 is a 1-CH 14-bit 200 MS/s digitizer designed for applications such as LIDAR testing, optical fiber testing, and radar signal acquisition. The 100 MHz bandwidth analog input with 50 ohm impedance is designed to receive 1 V high speed signal. With this simplified front-end design and high stable onboard reference, the PCIe/PXIe-9842 not only provides high accuracy measurement results but also delivers high dynamic perfor- mance. PCIe-9842 For applications that require data to be acquired and transferred in real time, the PCIe/PXIe-9842 utilizes the PCI Express x4 bus as its interface. When signals are converted from analog to digital data, data transfer to host system memory is continuous, enabled by the PCI Express increased bandwidth. PXIe-9842 Trigger Features Trigger Source PXI Express specification Rev. 1.0 compliant (PXIe-9842) Software Up to 200 MS/s sampling rate External digital High resolution 14-bit ADC PXI STAR (PXIe version) 1 V Input range with 50 input impedance and DC couple PXI trigger bus 0..7 (PXIe version) Up to 100 MHz bandwidth for analog input Trigger Mode High speed PCI Express Gen 1 x4 bus interface Post-Trigger Scatter-Gather DMA data transfer for high speed External Digital Trigger Input data streaming Compatibility: 3.3 V TTL One external digital trigger input Trigger condition: Rising edge or falling edge, software programmable One digital trigger output to stimulate external Minimum pulse width: 20 ns instruments Digital Trigger Output Full auto-calibration Compatibility: 3.3 V TTL OS Information Trigger Condition: Positive or negative, software programmable Windows XP/7/8, x64/x86 General Specifications Ambient temperature (Operational): 0C to 55C (32F to 122F) Software Compatibility Ambient temperature (Storage): -20C to 80C (-4F to 176F) LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Relative humidity: 10% to 90% non-condensing Physical Specifications Dimensions (not including connectors) - PCIe-9842: 175 mm (W) x 107 mm (H) (6.82 x 4.17 ) Analog Input - PXIe-9842: 160 mm (W) x 100 mm (H) (6.24 x 3.9 ) Number of Channels: One single-ended channel IO Connector Input Impedance: 50 2% SMA x 1 for analog input Input Coupling: DC SMA x 2 for external trigger input and trigger output Input Signal Range: 1.0 V Overvoltage Protection: 5 V Bus Interface ADC Resolution: 14 bits, 1 in 16384 PCI Express Gen 1 x4 Offset Error: 1 mV Certifications Gain Error: 0.5% of input EMC/EMI: CE, FCC Class A -3dB Bandwidth: 100 MHz Timebase Ordering Information Sample Clock Source: onboard oscillator Timebase Frequency: 200 MHz PCIe-9842 Auto Calibration 1-CH 14-Bit 200 MS/s High-Speed PCI Express Digitizer Reference Voltage: +5.000 V Reference Temperature drift: < 5.0 ppm/ PXIe-9842 Recommended warm-up time: 15 minutes 1-CH 14-Bit 200 MS/s High-Speed PXI Express Digitizer Updated January 29, 2013. 2013 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE MCM-204 USB-4711A-BE ACL-7130 LPCI-7230 PXES-2780 Rack-Mount kit USB-4761-BE SE028 PCI-1761-BE PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE USB-4751L-AE PCI-1710UL-DE PCI-1710U-DE PCI-1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 DAQe-2205 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-7442 PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB-1903 USB-2401 PCIE-1813-AE USB-5860-AE USB-5862-AE AR654/S1/P/P/P/P/IP30 AR654/S2/P/P/P/P/IP30