20HVA24-P2-F

HIGH VOLTAGE AMPLIFIERS 1 10HVA-20HVA SERIES Precision High-Voltage Amplifier PRELIMINARY DATASHEET The 10HVA-20HVA Series of DC-to-DC high-voltage power supplies operates a precision filter/divider & linear HV switch to produce a High-Voltage Amplifier (HVA). These modules provide a high- resolution, high-voltage DC to full scale waveform capability greater than 500 Hz output. 10/15/20kV HVA modules are optimized for bias applications while providing excellent line regulation, load regulation, Bipolar models available at 0 to 10kV, 15kV, 20kV dynamic response, and stability. The HVA Series can both source Unipolar models available at 0 to 15kV & 20kV and sink current operating linearly through 0V with low ripple and noise over the entire output range Operates in DC, reversible, and amplifier modes Fast slew rate (40V/s) and high bandwidth at an excellent value Typical applications for this series include the following: Can both source and sink current Drivers for electrohydrodynamics, electrostatic chuck, Pockels cells, laser & electro-optic modulation, electrophoresis. PPM level line & load regulation 25ppm temperature coefficient (15ppm optional) Amplifiers for ion beam and electron beam devices such as mass Reduced ripple option available spectrometry, and electron microscopes as well as electrostatic deflection/focusing, flocking, coating, electrospinning, precipitation Differential precision 0 to 10VDC control input and electrocoalescence. Precision voltage and current monitors PARAMETER CONDITIONS MODELS UNITS INPUT ALL TYPES Voltage Range Full Power 24VDC 10% VDC Current Standby / Disable <70 unipolar, <105 bipolar mA Current Full Load, Max Eout 1W=525 / 2W=TBD 1W=950 / 2W=TBD 1W=850 / 2W=TBD mA Current No Load, Max Eout 400 700 650 mA OUTPUT* 10kV 15kV/15kV 20kV/20kV Power Nominal Input, Max Eout 1 1 1.5 1 2 W Current Iout Entire Voltage Range 100 66 100 50 100 uA Ripple Full Load, Max Eout 0.05 0.05 0.05 0.05 0.05 %V pp Ripple with -F Option Full Load, Max Eout 0.0125 0.0125 0.0125 0.0125 0.0125 %V pp Voltage Monitor Normal Operating Conditions 0 to 10 0.5% VDC Current Monitor Normal Operating Conditions 0 to 10 1% VDC Line Regulation Vin Min to Vin Max, Max Eout <0.01 % Load Regulation No Load to Full Load, Max Eout <0.01 % PROGRAMMING & CONTROLS ALL TYPES Input Impedance Normal Operating Conditions 10 M Adjust Voltage Differential 0 to +10 VDC HV ON/OFF (Enable/Disable) 0 to +0.8V Disable, +2.5 to +10 Enable (Default = Disable) VDC Reference Voltage T = +25C, Initial Value +10.00 0.05% VDC Max Source Current T = +25C 1 mA ENVIRONMENTAL ALL TYPES Operating Full Load, Max Eout, Case Temp. +10 to +45 C Temperature Coefficient Over the Specified Temperature 25PPM or 15PPM (Optional) PPM/C Thermal Shock Mil-Std 810, Method 503.4-2 -40 to +65 C Storage Non-Operating, Case Temp. -40 to +100 C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through 10,000 ft Shock Mil-Std-810, Method 516, Proc. 4 20 Gs Vibration Mil-Std-810, Method 514, Fig. 514-3 10 Gs Specifications subject to change without notice. *Units listed without polarity can be ordered as positive (+) or negative (-). Units listed as () are bipolar. Higher Service, Higher Performance, Higher Reliability Making High Voltage Easier 2012, UltraVolt Inc. All rights reserved. ULTRAVOLTRev. 1 2/13 HIGH VOLTAGE AMPLIFIERS 2 10HVA-20HVA SERIES High Voltage Biasing Supply Precision High-Voltage Amplifier Downloadable drawings (complete with mounting & pin information) and 3D models are available online. CONSTRUCTION TOLERANCE Material: Aluminum Overall: 0.030in (1.27mm) Finish: Blue Anodized Mounting hole location: 0.025in (0.64mm) CONNECTIONS SIZE D-Sub 15 Pin Female Volume: 95.06in (1557.8cm) Non-RoHS compliant units are HV Connector, LGH1Li Weight: TBD available. Please contact the HV Return, 6-32 x 0.437 Long factory for more information. Threaded Post ORDERING INFORMATION UV-HVA INPUT CONNECTOR PINOUT FUNCTIONS 0 to 10,000 VDC Output 10HVA PIN DESCRIPTION FUNCTION Type 0 to 15,000 VDC Output 15HVA 1 Reference Voltage +10.00V precision reference 0 to 20,000 VDC Output 20HVA 0 to +10V or 0 to -10V to program full output voltage, Input 24VDC Nominal 24 2 Voltage Programming - depending on polarity. Programming input is differential Positive Output -P 3 Voltage Programming + between pins 2 and 3. Polarity Negative Output -N 4 Voltage Monitor 0 to 10V represents 0 to full output voltage Bipolar Output -BP 5 N/C No connection 1 Watt Output 1 6 Signal Ground Reference all control signals here Power 1.5 Watt Output 15kV Only 1.5 2 Watt Output 20kV Only 2 7 Input Power +24V Input Power Ripple Stripper Output Filter -F 8 Input Power Option 15ppm temperature coefficient -15PPM 9 Power Ground LGH1Li Standard Input power return 10 Power Ground Connections Flying Lead for HV Output -W Shielded Flying Lead for HV Output -WS 11 Enable TTL high to enable, low to disable, default is OFF Contact the factory for other output requirements 12 Current Monitor 0 to 10V represents 0 to full output current Example: 20HVA24-BP2-F 13 Current Limit Adjust 0 to +10V sets current limit from 0 to full rated output current Option 14 N/C No connection Voltage Power 15 Signal Ground Reference all control signals here Model Polarity Popular accessories ordered with this product include our full range of high voltage output connectors (see Accessories & Connectors datasheet). Input 1800 Ocean Avenue, Ronkonkoma, NY 11779 Making High Voltage Easier Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT