Quiet 4U Rackmount Chassis for ATX/CEB/EEB Motherboard or Full-size ACP-4010 SHB/SBC with Dual System Support Features Supports either an ATX/CEB/EEB single/dual processors motherboard or a PICMG backplane with up to 15 slots Supports one or two systems in a single chassis Shock-resistant disk drive bay design holds up to two 5.25 and two 3.5 disk drives LED indicators and alarm notification for system fault detection Low noise system fans Built-in Intelligent System Module enables whole system fan control and remote manageability Specifications External Internal Drive Bay 5.25 2 - 3.5 1 1 Fan 2 (12 cm /85 CFM each) Cooling Air Filter Yes USB 2.0 4 Front I/O Interface 9-pin D-Sub 2 (Reserved) LED Indicators Power, HDD, temperature, fan, LAN1, and LAN2 Miscellaneous Backplane version: One 9-pin D-Sub opening Rear Panel Motherboard version: Five 9-pin D-Sub and one 25-pin D-sub openings CPU/System fan speed , CPU/System temperature , motherboard voltage Intelligent System Module (Only selected Advantech MBs/CPU cards with WISE-PaaS/RMM installed can fully enable these functions, check with Advantech local rep. for Remote Monitoring detailed information.) Operating Non-Operating Temperature 0 ~ 40 C (32 ~ 104 F) -20 ~ 60 C (-4 ~ 140 F) Environment Humidity 10 ~ 85% 40 C, non-condensing 10 ~ 95% 40 C, non-condensing Vibration (5 ~ 500 Hz) 1 Grms 2 G Shock 10 G (with 11 ms duration, half sine wave) Dimensions (W x H x D) 482 x 177 x 479 mm (19 x 7.0 x 18.9 ) Physical Characteristics Weight 16.6 kg (36.5 lb) *Installation of all 15 full-size cards will sacrifice the two 3.5 disk drive bays. *While an EEB motherboard is installed in the chassis, only one 3.5 and two 5.25 disk drive bays are available. Front View Inside View Two reset buttons Two 3.5 drive bays for dual systems (int. x 1 & ext. x 1) Easy-to-maintain dual fans Two 9-pin D-Sub Four USB Two 5.25 openings reserved ports drive bays Industrial Chassis All product specifications are subject to change without notice. Last updated: 10-Apr-2019ACP-4010 Dimensions Unit: mm inch 101.6 4.00 492.3 19.4 177.0 7.0 477.4 18.8 92 3.6 92 3.6 92 3.6 98 3.9 Ordering Information Optional Accessories Part Number Description Model Name Description Mobile rack for converting a 3.5 drive bay to dual Backplane Version IPC-DT-3120E 2.5 SATA HDD trays ACP-4010BP-00BE Without PSU with ATX switch Mobile rack for converting dual 5.25 drive bays to Motherboard Version IPC-DT-5230E three 3.5 SATA HDD trays ACP-4010MB-00BE Without PSU with ATX switch Power cable for GPU card (Two 4-pin 12V connectors 1700029268-01 to one 6+2 pins PCIe power connector) Power Supply Options Power cable for GPU card (Two B4P Molex 1700024754-01 connectors to one 6+2 pins PCIe power connector) (For detailed power supply specs, please refer to Chapter 13) * If GPU card with 2 power connectors, please use 1700029268-01*1 + 1700024754- 80 Plus 01*1 If GPU card with 1 power connector, please use 1700029268-01. Part Number Wattage Type Input Grade * Only 500W or higher wattage PSU support 1700029268-01 and 1700024754-01 for AC 100 ~ 240 V high-end GPU card. PS8-300ATX-ZBE Bronze 300W Single (full range) AC 100 ~ 240 V PS8-400ATX-ZE Bronze 400W Single Spare Parts (full range) AC 100 ~ 240 V Part Number Description PS8-500ATX-ZE Bronze 500W Single (full range) 1990001299 Fan filter 95 x 130 mm 1+1 AC 100 ~ 240 V RPS8-500ATX-XE Bronze 500W 1990001298 Door filter 150 x 68 mm Redundant (full range) 1+1 AC 100 ~ 240 V RPS8-750ATX-XE Gold 750W Redundant (full range) Online Download www.advantech.com/products 426 16.8 426 16.8 465 18.3 482 19.0