AIM & THURLBY THANDAR INSTRUMENTS MX100T & MX100TP Triple output dc power supplies - 315 watts Three full performance outputs of equal power Multiple-ranges, up to 70V and up to 6A Ultra-compact size for bench or rack mounting Graphic LCD with simultaneous display of outputs Advanced features including sequenced on/off control USB, RS232, GPIB and LAN (LXI) interfaces (MX100TP) aimtti.com aimtti.co.uk aimtti.usMX100T - triple output 315 watt dc power supply - 3 x 35V/3A (70V max., 6A max.) Multiple Ranges Each output of the MX100T has more than one range enabling it to cover a wider variety of applications. Outputs two and three can also be combined internally to provide up to 210 watts of power. Range Combinations Output 1 Output 2 Output 3 35V/3A 35V/3A 35V/3A 35V/3A 16V/6A 35V/3A 35V/3A 35V/3A 70V/1.5A 35V/3A 16V/6A 70V/1.5A 35V/3A 35V/6A -- 35V/3A -- 70V/3A 16V/6A 35V/3A 35V/3A 16V/6A 16V/6A 35V/3A 16V/6A 35V/3A 70V/1.5A 16V/6A 16V/6A 70V/1.5A 16V/6A 35V/6A -- 16V/6A -- 70V/3A The MX Series - a new power supply generation Three high performance outputs of 105 watts each The MX Series represents a new generation of multiple output laboratory 3 x (0 to 35V at 0 to 3A) power supplies from Aim-TTi. Total power of 315 watts in a compact package Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a large backlit graphic Range switching gives up to 70 volts and up to 6 amps LCD with soft keys. Twelve range combinations for maximum flexibility The first models in the MX Series, the 315 watt MX100T and MX100TP are Up to 210 watts from a single output available now. Low output noise and ripple via linear final regulation Three full-performance outputs High setting resolution down to 1mV and 0.1mA The MX100T differs from most other triple output power supplies in having Variable OVP and OCP trips on all outputs three outputs of equal power, each with the ability to provide 35V at 3A. 50 setting memories per output plus 50 linked memories Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. Selectable isolated voltage tracking) Selectable current meter averaging Mixed-mode regulation Switchable remote sense on all outputs To provide its impressive power density the MX series combines high Graphic LCD provides simultaneous output metering frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Numeric or spin-wheel control of all parameters Excellent line and load regulation is matched by low noise and good Individual or combined output on/off control with transient response. programmable delay sequencing. 3U half-rack case for bench or rack mounting Range switching and power control GPIB, RS-232, USB and LAN (LXI) interfaces (MX100TP) To increase its ability to match a variety of applications, each output has more than one range. Duplicate power & sense terminals at rear (MX100TP) Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1.5A. When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output.