QL564 Aim-TTi

Laboratory Power Supplies - manual & bus programmable Measurably better value Linear Regulation Power supplies using all linear regulation offer the The disadvantage is greater physical size and weight lowest output noise, the best transient response and for a given power, together with higher heat output. the most benign stability characteristics when driving Linear regulation is used on the EL-R, PL, PLH and QL complex loads. series. QL & QL-P series II Model Outputs Voltage / Current Power Interfaces The triple output models incorporate two QL355 One 0 to 35V / 0 to 3A 105W - High precision power supplies single output units plus an auxiliary low or 0 to 15V / 0 to 5A QL564 One 0 to 56V / 0 to 2A 112W - Single or triple outputs voltage output. or 0 to 25V / 0 to 4A The two main outputs can be put into a Linear regulation, 105W to 242W QL355T Three 2 x (0 to 35V / 0 to 3A 228W - linked mode for simultaneous or tracking or 0 to 15V / 0 to 5A) control. RS-232/GPIB/USB/LAN interfaces plus 1 to 6V 3A QL564T Three 2 x (0 to 56V / 0 to 2A 242W - A master on/off system enables all three or 0 to 25V / 0 to 4A) outputs to be switched synchronously. plus 1 to 6V 3A QL355P One 0 to 35V / 0 to 3A 105W RS232/USB/ or 0 to 15V / 0 to 5A LAN/GPIB QL564P One 0 to 56V / 0 to 2A 112W RS232/USB/ or 0 to 25V / 0 to 4A LAN/GPIB QL355TP Three 2 x (0 to 35V / 0 to 3A 215W RS232/USB/ or 0 to 15V / 0 to 5A) LAN/GPIB plus 2.7/3.3/5.0 1A QL564TP Three 2 x (0 to 56V / 0 to 2A 242W RS232/USB/ or 0 to 25V / 0 to 4A) LAN/GPIB detailed views plus 1 to 6V 3A of triple output models Brief specifications for main outputs: Line & load regulation: <0.01%. Output noise: < 0.35mV rms. Setting accuracies: voltage - 0.03% 5mV, current - 0.3% 0.5mA. Sizes: singles - 141 x 172 x 300mm triples - 282 x 172 x 300mm (WxHxD) Linear regulation with noise below 0.35mV rms 1mV setting resolution at all output voltages Setting by direct numeric entry or by spin wheel Multiple ranges for higher currents at lower voltages Multiple non-volatile setting memories with preview OVP and OCP trips with isolated alarm output Selectable remote sense for perfect regulation The QL series II is a revised and improved version of The auxiliary output can be set and Linked-mode operation of main outputs (T models) monitored at the touch of a button. the best selling QL series. It represents the state- of-the-art in a linear regulated laboratory PSU. Auxiliary output of 1V to 6V at 3A with voltage Voltage can be set to 0.01V resolution and current can be monitored. Very high precision is matched by very low output setting to 0.01V and current metering (T models) noise. The digital user interface combines speed On P versions remote setting and Compact modular width for bench or rack mounting with safety. readback of the auxiliary output is GPIB, RS232, USB and LAN (LXI) interfaces (P versions) provided. Despite the compact dimensions, power is in excess of 100 watts per output, and multiple ranges Front and rear mounted output terminals (P versions) provide higher current at lower voltages. The series II adds extra models, a greatly improved QL-P versions are fitted auxiliary output on triple models, and a LAN with rear power and interface with LXI support on P models. sense terminals together with digital bus control interfaces. These now include LXI compliant ethernet in NEW addition to USB, RS232 and GPIB. For more complete information on any product, please visit our web site: www.aimtti.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for TTI manufacturer: Other Similar products are found below : PSA1302 EX355P-USB PLH120-P PSA2702 TGF3162 TGF4082 TGF4242 MX180T TG2512A BS407 MX100T PSA2702USC TF960 LDH400P MX180TP CPX200DP TG5012A QL355T SII 1908 CPX200D MX100TP PL303-P QL355P SII TGF4162