Series AM10C-FZ 10 Watt DC-DC Converter Picture coming soon FEATURES: Wide 2:1 Input Voltage Range 1500 VDC Isolation High Efficiency up to 89% Operating Temperature -40C to +85C Remote On/Off Over Voltage, Over load protection Standard 1x1 Package Output Short Circuit Protection Models Single output Input Voltage Output Voltage Output Current Max Capacitive Efficiency Model (V) (V) max (mA) Load(uF) (%) AM10C-1203S-FZ 9-18 3.3 2200 3300 83 AM10C-1205S-FZ 9-18 5 2000 2200 86 AM10C-1212S-FZ 9-18 12 830 680 89 AM10C-1215S-FZ 9-18 15 660 330 88 AM10C-1224S-FZ 9-18 24 410 100 88 AM10C-2403S-FZ 18-36 3.3 2200 3300 82 AM10C-2405S-FZ 18-36 5 2000 2200 86 AM10C-2412S-FZ 18-36 12 830 680 88 AM10C-2415S-FZ 18-36 15 660 330 87 AM10C-2424S-FZ 18-36 24 410 100 87 AM10C-4803S-FZ 36-75 3.3 2200 3300 80 AM10C-4805S-FZ 36-75 5 2000 2200 84 AM10C-4812S-FZ 36-75 12 830 680 86 AM10C-4815S-FZ 36-75 15 660 330 85 AM10C-4824S-FZ 36-75 24 410 100 85 Models Dual output Input Voltage Output Voltage Output Current Max Capacitive Efficiency Model (V) (V) max (mA) Load(uF) (%) AM10C-1205D-FZ 9-18 5 1000 1000 86 AM10C-1212D-FZ 9-18 12 410 470 89 AM10C-1215D-FZ 9-18 15 330 220 88 AM10C-2405D-FZ 18-36 5 1000 1000 85 AM10C-2412D-FZ 18-36 12 410 470 88 AM10C-2415D-FZ 18-36 15 330 220 87 AM10C-4805D-FZ 36-75 5 1000 1000 84 AM10C-4812D-FZ 36-75 12 410 470 86 AM10C-4815D-FZ 36-75 15 330 220 85 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 12 9-18 Voltage range 24 18-36 VDC 48 36-75 Filter Pi Start up time 100 ms 12 Vin 25 Absolute Maximum Rating 24 Vin 50 VDC 48 Vin 100 Peak Input Voltage time 100 ms ON Open or 3.5 to 12V/<0.2mA On/Off control OFF Short to pin 2 (-Vin) or 0 to 0.7V www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13 1 of 3 North America only Series AM10C-FZ 10 Watt DC-DC Converter Input Specifications (continued) Parameters Nominal Typical Maximum Units Idle input Current At OFF state 12 mA Input reflected current Nominal Vin and full load 53 mA p-p Transient response settling time 50% load step change 1.3 ms di/dt=0.8A/s 5 Transient response deviation % 3.3Vou 6 Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/O voltage 1500 VDC Resistance 500VDC >1000 MOhm Capacitance 1100 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 3.3 Vout 3.9 5 Vout 6.2 Over voltage protection 12 Vout 15 V 15 Vout 18 24 Vout 27 Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation LL to HL at full load 1 % of Vin Load voltage regulation (Single) 1% to 100% load 1 % Balanced Load 0.5 % Load voltage regulation (Dual) Unbalanced load 25% to 100% load 5 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 80 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature With derating above 60C -40 to +85 C o Storage temperature -55 to +125 C o Maximum case temperature 105 C Cooling Natural convection Humidity 95 % RH Case material Nickel-coated copper Weight 17.4 g Dimensions (L x W x H) 1 x 1 x 0.4 inches 25.4 x 25.4 x 10.2 mm MTBF >1,580,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25C) Pin Out Specifications Pin Single Dual 1 +V input +V input 2 -V Input -V Input 3 On/Off Control On/Off Control 4 +V Output +V Output 5 No Pin Common 6 -V output -V output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R13 2 of 3 North America only