AM1SS-2405SZ Aimtec

Click on Series name for product info on aimtec.com Series AM1SS-Z 1 Watt DC-DC Converter FEATURES: o o RoHS Compliant Operating Temperature -40 C to +85 C 4 Pin Sip Package Input / Output Isolation 1000 and 3000VDC Low Ripple And Noise Pin Compatible with Multiple Manufacturers High Efficiency up to 81% Continuous Short Circuit Protection Models Single output Input Output Output Input Current Max Isolation Efficiency Model Voltage Voltage Current Max Full Load No Capacitive (VDC) (%) (V) (V) (mA) Load (mA) Load (F) AM1SS-0505SZ 4.5-5.5 5 200 1000 267 55 100 75 AM1SS-0512SZ 4.5-5.5 12 83 1000 267 52 100 75 AM1SS-0515SZ 4.5-5.5 15 67 1000 173 50 100 73 AM1SS-1205SZ 10.8-13.2 5 200 1000 110 20 100 76 AM1SS-1212SZ 10.8-13.2 12 83 1000 107 23 100 78 AM1SS-1215SZ 10.8-13.2 15 67 1000 111 23 100 75 AM1SS-2405SZ 21.6-26.4 5 200 1000 54 15 100 77 AM1SS-2412SZ 21.6-26.4 12 83 1000 56 15 100 75 AM1SS-2415SZ 21.6-26.4 15 67 1000 51 12 100 81 AM1SS-0505SH30Z 4.5-5.5 5 200 3000 267 55 100 75 AM1SS-0512SH30Z 4.5-5.5 12 83 3000 267 52 100 75 AM1SS-0515SH30Z 4.5-5.5 15 67 3000 173 50 100 73 AM1SS-1205SH30Z 10.8-13.2 5 200 3000 110 20 100 76 AM1SS-1212SH30Z 10.8-13.2 12 83 3000 107 23 100 78 AM1SS-1215SH30Z 10.8-13.2 15 67 3000 111 23 100 75 AM1SS-2405SH30Z 21.6-26.4 5 200 3000 54 15 100 77 AM1SS-2412SH30Z 21.6-26.4 12 83 3000 56 15 100 75 AM1SS-2415SH30Z 21.6-26.4 15 67 3000 51 12 100 81 NOTE: All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 Voltage range 12 10.8-13.2 VDC 24 21.6-26.4 Filter Capacitor Turn on Transient process time 25 ms Start up time 200 ms 5 Vin 0-7 Absolute Maximum Rating 12 Vin 0-15 VDC 24 Vin 0-28 Peak Input Voltage time 100 ms Input reflected Ripple current with 12H 20 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60sec 1000 and 3000 VDC Resistance > 1000 MOhm Capacitance 10 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 3 % Short Circuit protection Continuous www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 1 of 4 North America only Series AM1SS-Z 1 Watt DC-DC Converter Output Specifications (continued) Parameters Conditions Typical Maximum Units Short circuit restart Auto-Recovery Line voltage regulation For 1% change of Vin 1.2 % of Vin Load voltage regulation Load 20 100% 10 % o Temperature coefficient 0.02 %/ C Ripple & Noise At 20MHz Bandwidth 100 mV p-p Capacitive load 220 F Rising time 50 ms General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 80 KHz o Operating temperature Full Load without Derating -40to +85 C o Storage temperature -40 to +125 C o Max Case temperature 100 C Cooling Free air convection Humidity 95 % Case material Non-conductive black plastic UL94-VO Weight 1.5 g Dimensions (L x W x H) 0.46 x 0.24 x 0.40 inches 11.68 x 6.00 x 10.15 mm o MTBF >1 121 000 hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) Safety Specifications Standards Safety IEC 60950-1 (Designed to meet) Pin Out SpecificationsDimensions Pin Single 1 - V Input 2 +V Input 3 - V Output 4 +V Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 2 of 4 North America only