Click on Series name for product info on aimtec.com Series AM2GH-Z 2 Watt DC-DC Converter FEATURES: SIP8 Package Ultra-Wide Input Range 4:1 Low Ripple and Noise 1600 VDC I/O Isolation Continuous Short Circuit Protection Efficiency up to 79% -40C to +85C Operating Temperature Range Remote ON/OFF Control Models Single output Output Maximum Input Current Input Output Current Efficiency Model Voltage Capacitive Full Load No Voltage (V) Max (mA) (%) (V) Load (F) Load (mA) AM2GH-1203SZ 4.5-18 3.3 500 1000 196 40 70 AM2GH-1205SZ 4.5-18 5 400 1000 225 40 74 AM2GH-1212SZ 4.5-18 12 166 220 213 40 78 AM2GH-1215SZ 4.5-18 15 133 100 213 40 78 AM2GH-2403SZ 9-36 3.3 500 1000 96 25 71 AM2GH-2405SZ 9-36 5 400 1000 106 20 78 AM2GH-2412SZ 9-36 12 166 220 105 30 79 AM2GH-2415SZ 9-36 15 133 100 105 30 79 AM2GH-4803SZ 18-75 3.3 500 1000 47 10 72 AM2GH-4805SZ 18-75 5 400 1000 55 15 75 AM2GH-4812SZ 18-75 12 166 220 55 15 75 AM2GH-4815SZ 18-75 15 133 100 54 15 76 Models Dual output Output Maximum Input Current Input Output Current Efficiency Model Voltage Capacitive Full Load No Voltage (V) Max (mA) (%) (V) Load (F) Load (mA) AM2GH-1205DZ 4.5-18 5 200 470 219 30 77 AM2GH-1212DZ 4.5-18 12 83 100 213 30 78 AM2GH-1215DZ 4.5-18 15 66 47 216 40 77 AM2GH-2405DZ 9-36 5 200 470 111 30 75 AM2GH-2412DZ 9-36 12 83 100 108 30 77 AM2GH-2415DZ 9-36 15 66 47 106 30 78 AM2GH-4805DZ 18-75 5 200 470 56 15 74 AM2GH-4812DZ 18-75 12 83 100 56 15 74 AM2GH-4815DZ 18-75 15 66 47 55 15 75 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 12 4.5-18 Voltage range 24 9-36 VDC 48 18-75 Filter Capacitor Start up time 30 ms 12 25 Absolute Maximum Rating 24 50 VDC 48 100 Peak Input Voltage time 100 ms On/Off control ON: 0 to 0.6VDC (or open) OFF:2.7 to 15.0VDC, OFF idle current: 2-4mA No Load Input Current 40 mA Input reflected current 20 mA www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 1 of 6 North America only Series AM2GH-Z 2 Watt DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1600 VDC Resistance >1000 MOhm Capacitance 200 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 25% load on one output - 100% load Cross Regulation (Dual Output Models) 5 % on second load Short Circuit protection Continuous Short circuit restart Auto-Recovery Line voltage regulation 0.2 % Load voltage regulation From 0% to 100% load 1 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 30 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 KHz o Operating temperature -40 to 85 C o Storage temperature -40 to +125 C o Maximum case temperature 100 C o Derating Above 71C 5 %/ C Cooling Free Air Convection Humidity 95 % RH Case material Non conductive black plastic Potting Material Silicon (UL94V-0 rated) Weight 4.8 g Dimensions (L x W x H) 0.86 x 0.36 x 0.44 inches 21.85 x 9.20 x 11.10 mm MTBF >1,700,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25C)hours o Maximum soldering temperature 1.5mm from case for 10 second 260 C Transient recovery time 250 uS Transient recovery deviation 3 % Safety Specifications Parameter Agency Approvals CE EN55022: 2006 + A1:2007, Class A EN55024:1998 + A1:2001 + A2:2003 IEC61000-4-2:1995 + A1:1998 + A2:2000, Perf. Criteria B IEC61000-4-3:2006, Perf. Criteria A Standards IEC61000-4-4:2004, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5:2005, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6:2007, Perf. Criteria A IEC61000-4-8, Perf:1993 + A1:2000, Criteria A NOTE: Also designed to meet IEC 60950-1:2001 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 2 of 6 North America only