Fuse Blocks, 1/4 x 1 and 1/4 x 11/4 in. * CAFL4U CAFL4U(L) CAFL4U(N) CAFL4U(L) is equipped with a LED for blown fuse indication. CAFL4U(N) is equipped with a neon bulb for same application. Fuse not included. Fuse not included. Fuse not included. Terminal Width 9 mm 9 mm 9 mm Height x Length 50 x 72 mm 50 x 72 mm 50 x 72 mm Stripping Length 9.5 mm 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps 24V AC/DC, 48V AC/DC, 110-220V AC/DC, 300V AC LED/Neon Voltage 110V AC/DC, 220V AC, 300V AC 1 1 1 1 1 1 1 1 1 / / / / / / / / / Type of Fuse Used 4x1 in., 4x1 4 in. 4x1 in., 4x1 4 in. 4x1 in., 4x1 4 in. Approvals 60947-7-3 60947-7-3 E220514 60947-7-3 E220514 E220514 Wire Range 22-10 AWG 0.2-4 sq.mm 22-10 AWG 22-10 AWG 0.2-4 sq.mm 22-10 AWG 22-10 AWG 0.2-4 sq.mm 22-10 AWG Voltage Rating 600 V 1000 V 600 V 600 V 1000 V 600 V 600 V 1000 V 600 V Current Rating 16 A 6.3 A 16 A 16 A 6.3 A 16 A 16 A 6.3 A 16 A Torque 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CAFL4U 25 CAFL4U(L)* 25 CAFL4U(N) 25 End Plate EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 DIN Rail for ordering information refer to pages 90-91 End Stop CA702 50 CA702 50 CA702 50 for ordering information CA802 50 CA802 50 CA802 50 refer to page 92 External 2 pole CA716/2 50 CA716/2 100 CA716/2 100 Jumper 3 pole CA716/3 50 CA716/3 50 CA716/3 50 4 pole CA716/4 50 CA716/4 50 CA716/4 50 10 pole CA716/10 25 CA716/10 20 CA716/10 20 Marking Tags MT9 100 MT9 100 MT9 100 27K 1N4007 LED Circuit for o ine indication in CAFL4UL24V Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 23