CB1038-1

DIAZED AND NEOZED ACCESSORIES SCREW CAP The Screw Cap types offered fit the various fuse and Fuse Base sizes. They hold the fuses in place and connect the Thread head of the fuse with the load side of the Fuse Holder. The colored blown fuse The Diazed System indicator on the head of the fuse is clearly visible through a small window in Diazed Screw Cap the top of the Screw Cap. A small test Screw Cap hole on the side of the Cap allows for a Approx. probe to test if voltage is present on the Dim. mm (in.) Use With metallic surface on the head of the fuse. Cat. No. Height Thread Dia. Fuse(s) D16C 34 (1.34) 16 (.63) ND-E 16 ADAPTER SCREW / RING Fuse Head D27C 43 (1.69) 27 (1.06) DII-E 27 Adapter Screws are used with the D33C 43 (1.69) 33 (1.30) DIII-E 33 Diazed, and Adapter Rings are used with Fuse Body the Neozed Fuses. Three sizes of Screws and Rings are available to fit the Fuse Tip diameter of the different size fuse bases. Adapter Screws are porcelain rings with a center hole on one side, a threaded stud Adapter on the other and one notch on each side. Screw The inside diameter of the center hole of the Adapter Screw matches the diameter of the tip of the Diazed fuse for which it is Fuse intended. This helps to eliminate the Base Cover insertion of fuses with higher current ratings than allowed. The integral Diazed Adapter Screw Tool threaded stud installs into the appropriate Diazed Fuse Base. Adapter Screws and Use With Rings are color coded to the fuses. Cat. No. Fuse (s) Fuse Base DAT DII-E 27, DIII-E 33 FUSE BASE Fuse Bases hold fuses in place (in conjunction with the Screw Cap) and insure proper electrical connections. They snap easily onto standard 35mm DIN rail or can be panel mounted. They The Neozed System are available in one or three pole designs. Matching Covers are available. The line is connected to the metal tab at the bottom of the fuse base. The load is Screw Cap connected to the metal ring into which the Screw Cap is installed. Thread FUSE BASE COVER Fuse Head Neozed Screw Cap Fuse Base Covers are available in one Approx. and three pole designs to match the Fuse Fuse Body Dim. mm (in.) Use With Bases we offer. They help prevent shock Cat. No. Height Thread Dia. Fuse(s) from accidental touching of conducting metal parts on the Base. Fuse Tip NZ01C 31 (1.22) 14 (.55) D01 NZ02C 31 (1.22) 18 (.71) D02 TOOLS NZ03C 37 (1.46) 30 (1.18) D03 Adapter The Adapter Screw / Ring Tools aid in Ring the insertion and removal of the Adapters from the Fuse Base. The Adapter Screw Tool fits into notches on the Adapter Fuse Screw for the D27 and D33 Diazed Base Cover fuses. The Adapter Ring Tool fits the Adapter Rings for the D01, D02 and D03 Neozed fuses. We strongly recommend Neozed Adapter Ring Tool these tools be used when inserting or removing Adapter Screws or Rings to Use With prevent electrical shocks. Fuse Base Cat. No. Fuse(s) NAT D01, D02, D03 l l l l Altech Corp. 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com 10 Diazed Adapter Screw Diazed Fuse Base Diazed Fuse Base Cover Approx. Use Approx. Use No. of Cat. Dim. mm (in.) With No. of Cat. Dim. mm (in.) With Use With Poles No. Height Width Fuse(s) Poles No. Height Width Fuse(s) Cat. No. Current Color Fuse(s) For Fuse Type DII-E 27 1 D16B 45 (1.77) 29 (1.14) ND-E 16 1 D16BC 20 (.79) 40 (1.57) ND-E 16 1 D27B 46 (1.81) 38 (1.50) DII-E 27 1 D27BC 20 (.79) 40 (1.57) DII-E 27 D27AS02 2A Pink 2D27SB(FB)(SC) 1 D33B 48 (1.89) 49 (1.93) DIII-E 33 1 D33BC 20 (.79) 49 (1.93) DIII-E 33 D27AS04 4A Brown 4D27SB(FB)(SC) D27AS06 6A Green 6D27SB(FB)(SC) 3 D27B3 46 (1.81) 90 (3.54) DII-E 27 3 D27BC3 20 (.79) 90 (3.54) DII-E 27 D27AS10 10A Red 10D27SB(FB)(SC) 3 D33B3 46 (1.81) 109 (4.29) DIII-E 33 3 D33BC3 20 (.79) 111 (4.37) DIII-E 33 D27AS16 16A Gray 16D27SB(FB)(SC) D27AS20 20A Blue 20D27SB(FB)(SC) D27AS25 25A Yellow 25D27SB(FB)(SC) Height : 14mm (.55 in.) For Fuse Type DIII-E 33 D33AS35 35A Black 35D33SB(FB)(SC) D33AS40 40A Black 40D33SB(FB)(SC) D33AS50 50A White 50D33SB(FB)(SC) D33AS63 63A Copper 63D33SB(FB)(SC) Height : 14mm (.55 in.) Neozed Fuse Base Neozed Adapter Ring Neozed Fuse Base Cover Approx. Use Approx. Use No. of Cat. Dim. mm (in.) With No. of Cat. Dim. mm (in.) With Use With Cat. No. Current Color Fuse(s) Poles No. Height Width Fuse(s) Poles No. Height Width Fuse(s) For Fuse Type D01 1 NZ01B 42 (1.65) 27 (1.06) D01 1 NZ01BC 23 (.91) 27 (1.06) D01 NZ01AR02 2A Pink 2NZ01GL(SC) 1 NZ02B 42 (1.65) 27 (1.06) D02 1 NZ02BC 23 (.91) 27 (1.06) D02 NZ01AR04 4A Brown 4NZ01GL(SC) 1 NZ03B 46 (1.81) 44 (1.73) D03 1 NZ03BC 18 (.71) 44 (1.73) D03 NZ01AR06 6A Green 6NZ01GL(SC) NZ01AR10 10A Red 10NZ01GL(SC) 3 NZ01B3 42 (1.65) 81 (3.19) D01 3 NZ01BC3 23 (.91) 81 (3.19) D01 Height : 10mm (.39 in.) 3 NZ02B3 42 (1.65) 81 (3.19) D02 3 NZ02BC3 23 (.91) 81 (3.19) D02 For Fuse Type D02 NZ02AR20 20A Blue 20NZ02GL(SC) NZ02AR25 25A Yellow 25NZ02GL(SC) NZ02AR35 35A Black 35NZ02GL(SC) NZ02AR50 50A White 50NZ02GL(SC) Height : 10mm (.39 in.) For Fuse Type D03 NZ03AR80 80A Silver 80NZ03GL(SC) Height : 10mm (.39 in.) l l l l Altech Corp. 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com 11