CB1038-3/I Altech

Fuse Holders, 10 x 38 mm and CC Type 1 POLE 2 POLE 3 POLE The main characteristics of fuse disconnectors are: UL recognized (10x38mm) UL listed (CC Type) Compliance with IEC 60947-1, IEC 60947-3 Plastic parts are made of material resistant to high temperatures Terminal Width (B) 17.5 mm 35 mm 52.5 mm All contact surfaces are silver plated Height x Length 81 x 64.5 mm 81 x 64.5 mm 81 x 64.5 mm Mounting on standard DIN 35 mm rail (DIN EN60715). Stripping Length 11 mm 11 mm 11 mm Available up to 4 pole Insulation Material Aculon Aculon Aculon For all sizes a version with electronic indicator is Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps available. There are two Wire Range 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG technical types of indicator: Rating 690 V / 32A 690 V / 32A 690 V / 32A L (LED) (10x38mm only) with Rating 600 V AC/DC / 30A 600 V AC/DC / 30A 600 V AC/DC / 30A built in LED diode which blinks after the fuse-link Torque 2-2.5 Nm / 31 lb-in 2-2.5 Nm / 31 lb-in 2-2.5 Nm / 31 lb-in operates. The internal circuit resistance is 2M, thus the Cylindrical 10x38 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. total dissipation is minimal. Indicator: The indicator is capable of None CB1038-1 1 CB1038-2 1 CB1038-3 1 operating in conditions of LED CB1038-1/L 1 CB1038-2/L 1 CB1038-3/L 1 open circuit with minimum Neon CB1038-1/I 1 CB1038-2/I 1 CB1038-3/I 1 capacitance be-tween con- Type of Fuse Used 10 x 38 mm 10 x 38 mm 10 x 38 mm nection cables. Operating voltage range spans from Approvals** 50V to 690V AC and DC. E212627 E212627 E212627 CC Type Holder Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. I (NEON) (10x38mm only) with neon lamp, which is CB10CC-1 1 CB10CC-2 1 CB10CC-3 1 constantly lit after the fuse- Type of Fuse Used CC Type CC Type CC Type link operates. The internal circuit resistance is 570k, thus it is necessary that the Approvals E212627 E212627 E212627 circuit be closed in order for the indicator to function. The operational voltage range is DIN Rail 100 V to 750 V AC. for ordering information refer to pages 90-91 * Fuses are sold separately Altech, see pages 100-101. End Stop CA702 50 CA702 50 CA702 50 for ordering information CA802 50 CA802 50 CA802 50 refer to page 92 **1000V UL PV rating pending. 79 mm (3.11 in.) 64.5 mm (2.54 in.) Cylindrical 47.5 mm (1.87 in.) 10 x 38 4 mm (0.16 in.) 37 mm (1.46 in.) B Dimension for B: 1 Pole 17.5mm 1 Pole + Neutral 35mm CC Type 2 Pole 35mm 3 Pole 52.5mm 3 Pole + Neutral 70mm 24 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 81 mm (3.19 in.)X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Altech manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 020417G 020418E 6R30A1B F600A3B 80910030 8601.2020 G15A2SPQ 9-3557-GP REV A HDJ-B R6J30A3S HFH-1 RF30A2B RF30A3SP 15600-08-10 BK/FHN19G BK/HHM BK/HKP-CCHH BK/HKP-JJ BK/HTJ-LES-FUSE HMG- 241 HTJ-LES-FUSE C4044-1 2086-1 2193 2602 2650 178.000100 FHN31G1 T30A2B G4PB8 2660 2799 CQ-209V HKP-CCHH R6F30A2S 341001A 345621A CVRMCC 4202 4407 4408 4413 4423 4532 4537 TSD1404-12 BK/FHN31G1 BK/HC-5