CB2258-3

Cylinder Fuse Holders, 8 x 31 mm, 14 x 51 mm and 22 x 58 mm 8 x 31 14 x 51 22 x 58 Fuse Bases secure the fuses in place and insure proper electrical connec- tions. Fuse Bases are available in one, two, three and four pole designs. Types 8x31 and 10x38 are easily DIN rail mounted Types 14x51 and 22x58 can be DIN rail Terminal Width mounted or mounted to 1 pole: 17.5 mm (0.69 in.) 27 mm (1.07 in.) 27 mm (1.07 in.) any flat surface. Cylinder 1 pole + indicator: 17.5 mm (0.69 in.) 27 mm (1.07 in.) 27 mm (1.07 in.) Fuse Bases are available 1 pole + N: 35 mm (1.38 in.) 54 mm (2.15 in.) 71 mm (2.80 in.) with optional blown fuse 2 pole: 35 mm (1.38 in.) 54 mm (2.15 in.) 71 mm (2.80 in.) indication. 2 pole + indicator: 35 mm (1.38 in.) 54 mm (2.15 in.) 71 mm (2.80 in.) 3 pole: 52.5 mm (2.07 in.) 81 mm (3.20 in.) 107 mm (4.20 in.) The main characteristics 3 pole + indicator 52.5 mm (2.07 in.) 81 mm (3.20 in.) 107 mm (4.20 in.) of fuse disconnectors are: 3 pole + N: 70 mm (2.76 in.) 108 mm (4.25 in.) 142.5 mm (5.60 in.) Height x Length 81 x 64.5 mm 94 x 70 mm 120.5 x 70 mm 14x51 mm only) (3.20 x 2.40 in) (3.70 x 2.76 in) (4.73 x 2.76 in) 60947-1, IEC 60947-3 Insulation Material Aculon Aculon Aculon Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps material resistant to high temperatures Wire Range Mininum 1 sq mm (18 AWG) 1 sq mm (18 AWG) 1.5 sq mm (16 AWG) Max. Stranded 16 sq mm (6 AWG) 25 sq mm (4 AWG) 35 sq mm (2 AWG) silver plated Max. Solid 25 sq mm (4 AWG) 35 sq mm (2 AWG) 50 sq mm (1 AWG) DIN 35 mm rail (DIN Rating 600V AC/DC / 30A 600V AC/DC / 50A N/A EN60715). 400V AC/DC / 20A 400V AC/DC / 50A 400V AC/DC / 125A Rating 500V AC/DC / 32A 500V AC/DC / 100A 690V AC/DC / 25A 690V AC/DC / 80A with electronic indicator is available. Torque 2-2.5 Nm / 31 lb-in 2.5 Nm / 22 lb-in 3 Nm / 26 lb-in The 8x31 fuse holders Type Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. with indicator are built with a NEON lamp, which 1 pole: CB831-1 12 CB1451-1 12 CB2258-1 3 is constantly lit after the 1 pole + indicator: CB831-1/I 12 CB1451-1/I 12 CB2258-1/I 3 fuselink operates. The 1 pole + N: CB831-1N 6 CB1451-1N 6 CB2258-1N 2 internal circuit resistance 2 pole: CB831-2 6 CB1451-2 6 CB2258-2 2 is 570k, thus it is neces- 2 pole + indicator: CB831-2/I 6 CB1451-2/I 6 CB2258-2/I 2 sary that the circuit be 3 pole: CB831-3 4 CB1451-3 4 CB2258-3 1 closed in order for the 3 pole + indicator CB831-3/I 4 CB1451-3/I 4 CB2258-3/I 1 indicator to function. The 3 pole + N: CB831-3N 3 CB1451-3N 3 CB2258-3N 1 operational voltage range is 100 V to 750 V AC. Type of Fuse Used 8x32 mm 14x51 mm 22x58 mm The 14x51 and 22x58 fuse Approvals** holders with indicator have a E212627 E212627 built in LED which blinks after the fuse-link oper- DIN Rail ates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is End Stop CA702 50 CA702 50 CA702 50 capable of operating in CA802 50 CA802 50 CA802 50 conditions of open circuit with minimum capaci- tance between connection cables. Operating voltage range spans from 50V to 690V AC and DC. * Fuses are sold separately. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.com 15X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Altech manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 020417G 020418E 6R30A1B F600A3B 80910030 8601.2020 G15A2SPQ 9-3557-GP REV A HDJ-B R6J30A3S HFH-1 RF30A2B RF30A3SP 15600-08-10 BK/FHN19G BK/HHM BK/HKP-CCHH BK/HKP-JJ BK/HTJ-LES-FUSE HMG- 241 HTJ-LES-FUSE C4044-1 2086-1 2193 2602 2650 178.000100 FHN31G1 T30A2B G4PB8 2660 2799 CQ-209V HKP-CCHH R6F30A2S 341001A 345621A CVRMCC 4202 4407 4408 4413 4423 4532 4537 TSD1404-12 BK/FHN31G1 BK/HC-5