PS-30 Series Features: Universal AC input/ full range Specifications Protections: Short Circuit / Overload / Over Voltage Cooling by free air convection DIN rail mountable Isolation class II LED indicator for power on 100% full load burn-in test 3 year warranty Cat. No. PS-3005 PS-3012 PS-3015 PS-3024 OUTPUT DC VOLTAGE 5V 12V 15V 24V RATED CURRENT 3A 2A 2A 1.5A CURRENT RANGE 0 ~ 3A 0 ~ 2A 0 ~ 2A 0 ~ 1.5A RATED POWER 15W 24W 30W 36W RIPPLE & NOISE (max) 80mVp-p 120mVp-p 120mVp-p 150mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1F & 47F parallel capacitor VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V VOLTAGE TOLERANCE 2.0% 1.0% 1.0% 1.0% Tolerance: includes set up tolerance, line regulation and load regulation. LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 100ms, 30ms / 230VAC 100ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 100ms / 230VAC 21ms / 115VAC at full load INPUT VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 74% 81% 82% 83% AC CURRENT (Typ.) 0.88A / 115VAC 0.48A / 230VAC PROTECTION INRUSH CURRENT (Typ.) COLD START 15A / 115VAC 30A / 230VAC OVERLOAD 105 ~ 160% rated output power Protection type: Constant current limiting recovers automatically after fault condition is removed OVERVOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type: Shut down overvoltage, clamping by zener diode ENVIRONMENT WORKING TEMP. -20 ~ +60C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT 0.03% / C (0 ~ 50C) VIBRATION Component: 10 ~ 500Hz, 2G 10min. / 1cycle, 60 min. each long X,Y, Z axes MOUNTING Compliance to IEC60068-2-6 SAFETY & EMC SAFETY STANDARDS UL60950-1 EN60950-1 compliant Design refer to EN50178 WITHSTAND VOLTAGE I/P-O/P: 3KVAC ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC EMI CONDUCTION & RADIATION Compliance to EN55011 EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN55024 ENV50204 EN61000-6-2 EN61204-3 heavy industry level criteria A The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF 441.5K hrs min. MIL-HDBK-217K (25C) DIMENSION 78x93x56mm (WxHxD) PACKING 0.27Kg 48pcs / 14Kg / 1.02CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25C of ambient temperature For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 78Mechanical Specification 56 78 47 5 37.75 555 12.2 27.4 Terminal Pin. No Assignment 7 Pin No. Assignment Pin No. Assignment 1 AC/L 5,6 -V 2 AC/N 7 LED 3,4 +V 8 +V ADJ. 3 8 Block Diagram RECTIFIERS POWER RECTIFIERS +V EMI I/P & SWITCH- & FILTER -V FILTER ING FILTER DETECTION CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage Ta=25 100 100 90 80 80 70 60 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (VERTICAL) 85 951100 11520 140 160 180 200 220 240 264 AMBIENT TEMPERATURE (C) INPUT VOLTAGE (VAC) 60Hz Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 79 LOAD (%) 1 2 3 LOAD (%) 4 5 6 93 45 68