AMB8426 Compact Low-Cost Radio Module 868 MHz SRD Band Key Features Low-cost OEM radio module for the 868 MHz SRD band Compact dimensions: 17 x 27 x 4 mm Supports low-power applications and WOR (wake-on radio) Integrated AMBER RF stack with extensive functions Flexible addressing with up to 255 nodes in 255 networks Complies with requirements of R&TTE Directive 1999/5/EC Tape & Reel packaging for automatic component placement Also available as wireless USB adapter (AMB8465) Compatible to AMB8425, but more powerful microprocessor, small variations in dimensions and footprint Network Topologies Description The AMB8426 is a compact and low-cost radio data transmission module for wireless half-duplex communication. The integrated microprocessor controls data communication, handling packet and checksum generation, addressing, monitoring of channel access and re-transmission of lost packets. The host system does not have to perform any radio-specific tasks. The module can be configured in many ways and supports data transfer with fast channel and address switching. An opportunity to assess the quality of the radio link is also provided by using the measured field strength (RSSI value). The graphical user interface of the freely available Windows application AMBER-ACC makes it easy to set operating parameters. A USB stick version is available to easily connect the AMB8426 to a PC system. The AMB8426 is designed as a SMT device and is suitable for automatic Star component assembly. It can also be delivered in tape and reel packaging. Interfaces The AMB8426 is connected to a host system via the UART interface with bit rates of up to 115.2 kbaud. Other pins are used for data flow control and to switch between operating modes. An SPI interface is optionally available (separate firmware). Using appropriate firmware, the module is also suitable for autonomously recording digital or analogue signals. Peer-to-Peer Range of Application Data collection, monitoring, remote control and sensor networks. Its compact dimensions and low power consumption make the radio module ideal for battery-powered devices. AMB8426 Dimensions Pin Assignment No. Pad Name I/O Description 1 ANTENNA - Antenna connection 2,23 GND - Ground 3 VCC - Positive supply voltage 4 UTXD O UART transmit 5 URXD I UART receive 6 /RTS 0 Flow control 7 /CTS I Flow control 8 /DATA INDICATE O Signals incoming data 11 /DATA REQUEST I Triggers packet transmission 13 SLEEP I Selection of low-power mode 14 TRX DISABLE I Selection of low-power mode 15 /CONFIG I Switches to command mode 19 /RESET I Reset 20 RX INDICATE O Signals radio reception 21 TX INDICATE O Signals radio transmission 9,10,12,16,17,18, RSVD - Reserved (do not connect) 22 Specifications Performance Range* Up to 700 m RF data rate Up to 250 kbps (Gross) Interface data rate Up to 115.2 kbps (UART) Output power 11 dBm (50 ) RF sensitivity up to -112 dBm (50 ) General Power supply 2.2 3.6 V Power consumption - TX: typ. 38 mA - RX: typ. 24 mA - Low Power: typ. < 0.3 A Dimensions 17 x 27 x 4 mm Operating temperature -30 to +85 C Weight approx. 3 g Antenna External antenna connector RF technology Addressing Up to 255 nodes on 255 networks Frequency range 865.0 868.6 MHz Channel spacing 50 kHz Modulation 2-FSK, MSK Supported topologies Star, Peer-to-Peer Conformity Europe EN 300 220, EN 301 489, EN 60950, EN 50371 * Range stated assumes line-of-sight. Actual range may vary depending on antenna choice, board integration and environment. Related Products AMB8426-EV Evaluation-Kit AMB8465 USB Stick based on AMB8425 Ordering information Contact AMBER wireless GmbH Item no. Description Albin-Koebis-Strasse 18 51147 Cologne, Germany AMB8426 Low-Cost Radio Module868 MHz RF module Tel.: +49 2203 98019 0 AMB8426-TR Low-Cost Radio Module868 MHz RF module, Tape & Reel E-mail: info amber-wireless.de Internet: www.amber-wireless.de AMBER wireless GmbH assumes that the statements made in this data sheet are correct at the time of issue. AMBER wireless GmbH reserves the right to make changes to technical specifications or product functions without prior notice. AMBER wireless GmbH does not assume any responsibility for the use of the described products, neither does it convey any license under its patent rights. All trademarks, registered trademarks and product names are the property of their owners 2012 AMBER wireless GmbH AMB8426 DS EN V1.3