PL-900SM-N SERIES Plastic Shell Auto-Coupling Connectors 14 Pole capacity miniature power connector for overmolding PL-900SM-N FEATURES The PL-900SM-N is available in several power circuit configurations for industrial and medical electronic applications. This connector series is ideal for applications where safety, ease of use, and exposure to hostile environments are prevalent. Packaging (intuitive, compact, configurable) Performance (for harsh environments) Water proof (IP-67 rated) Pulse-Lok auto-latch / quick-release mechanism Sterilizable confirms continuity Chemical resistant housing Concealed contacts meet IEC and UL safety Up to 5,000 mating cycles (with std.Contacts) specifications Factory terminated, overmolded cable Available as a rugged overmolded cable assembly Polarized housing eliminates missmating assemblies for enhanced flex and stain relief 14 proprietary color combinations for coding SPECIFICATIONS Mechanical Environmental Electrical (see below) Mating Cycles: 5K cycles max Operating Temp: -20C to +105C** Mating Life: 5,000 cycles min. Retention Force: Moisture Resistance: to IP-67 (IEC) High Current Ratings per UL/ANSI/EIA Mated Connectors: 50 lbs. Minimum Flammability Rating: UL94 V-0 (PL900SM-V only) Dielectric withstand Voltage: 2200V RMS Cable to Connector: 50 lbs. Typical Sterilizable: gamma, EtO & Autoclave (Contact to Contact, Contact to Outer Housi- Contact Barrel Wire Size: 12 to 22 Chem. Resistance: common OR cleaning solvents ing) Contact Isolation: Probe 7lbs. Per IEC Insulation Resistance: Per ANSI/EIA-364-14 60601-1 * post conditioning Material **Dependent on overmold material Connector Housing: Nylon Flex Reliefs: Thermoplastic Rubber Contacts/Sockets: Brass / BeCu, Gold Plate per MIL-G-45204C TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECFICATIONS Up to 14 Contact Positions Contact Contact Size Number of Max Wire Operating Operating Current Resistance Poles Pin (mm) Gauge Voltage Max Max (A) (ohms) 14 0.7 22 600V AC/DC 5.0 <10m 12 0.7 22 600V AC/DC 5.0 <10m 10 0.7 22 600V AC/DC 5.0 <10m 7 1.5 16 600V AC/DC 15.0 <10m 3 2.4 12 600V AC/DC 30.0 <10m Custom contact inserts are available. Consult factory. STANDARD HOUSING OPTIONS Rear Panel-Mount In Line Receptacle Assembly In-Line Plug Assembly Receptacle Assembly .90 .90 0.460 typ. 2.90 3.19 Shown with optional backshell (See Table C) Showm with Overmolded Strain Relief In-Line Receptacle (for overmolding) In-Line Plug (For overmolding) 1.00 1.00 2.00 2.31 Panel Thickness Range = 0.063 to 0.250 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in gray with black couplers and backshells. Standard color is black on black. See our online configurator for color options at : www.amphenolalden.com/configurator *All dimensions shown in inches except where indicated Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Fax: 508-583-0164 1 an Amphenol Alden specialist today. www.amphenolalden.com PL-900SM-N SERIES Plascti Shell Auto-Coupling Connectors 14 pole capacity for High Power Applications TABLE B: STANDARD PART NUMBERS Rear Panel-Mount Number of Poles In-Line Receptacle In-Line Plug Receptacle Solder Cup Solder Cup PCB Solder Cup 340196 340518 340525 340112 14 340182 340490 340497 340084 12 10 340168 340462 340469 340056 7 340154 340448 340028 3 340140 340434 340000 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator Options Include: Indicator Color Options Black (std.), Gray, White, Blue, Red, Green, Yellow Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options .187 (std.), .063, .187,.250 Contact Termination Standard contact is equipped with a MIL crimp barrel suitable for soldering TM Rear Panel-Mount Receptacle, Cut-Out Template Press & Seal Contact System PCB (Panel-Mount Receptacles only) .880 Contacts provide IP-67 watertight seal when 1.05 mounting inserted into insulator Flange Footprint Easy crimp & poke installation Excellent contact retention Contacts may be crimped or soldered Available on 3 to 14-Pole Configurations Request Sales Drawing for PCB .775 Accepts multiple wire gauges 12, 16, 22 AWG mounting template ACCESSORIES Protective Connective Caps (IP-67 Seal Rating) Plug Soaking Cap In-Line Receptacle Dust Cover Panel-Mount Receptacle Dust Cover (Wire Tether with cable loop) (Wire Tether with cable loop) (Nylon Tether locks into panel washer) P/N 110401-01 P/N 111179-01 P/N 111026-01 Plug Soaking Cap Plug Soaking Cap: Receptacle Dust Cover Panel-Mount Receptacle Dust Cover: (Without Wire Tether) (Without Wire Tether) The PL-900 Series Plug Soaking Cap is The PL-900 Series receptacle dust designed to protect the plugs contact cover protects the receptacles contact system when a cable assembly is being system from dust, moisture, and cleaned or not in use. The soaking cap mechanical stress when the connector locks onto the plug providing an IP-67 seal pair is disengaged. When secured the that is ideal for soaking lin liquid dust cover will provide an IP-67 disinfectants. The soaking cap can be environmental seal. The cover is P/N 107522-01 P/N 107521-01 permanently attached to a a cable assembly equipped with a tether for security. Note: Black (std.) Gray (opt.) by means of a light weight tether. ASSEMBLY INSTRUCTIONS Receptacles: Plugs: AI-PL900SMN-P01 (3Pole, 12AWG) AI-PL900SMN-ILR01 (3Pole, 12AWG) AI-PL900SMN-ILR02 (7Pole, 16AWG) AI-PL900SMN-P02 (7Pole, 16AWG) AI-PL900SMN-ILR03 (10-14Pole, 22AWG) AI-PL900SMN-P03 (10-14Pole, 22AWG) AI-PL900SMN-RPM01 (3Pole, 12AWG) AI-PL900SMN-RPM02 (7Pole, 16AWG) AI-PL900SMN-RPM03 (10-14Pole, 22AWG) Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Fax: 508-583-0164 2 an Amphenol Alden specialist today. www.amphenolalden.com