340112

PL-900SM-N SERIES Plastic Shell Auto-Coupling Connectors 14 pole capacity miniature power connector for overmolding PL-900SM-N FEATURES Available as a rugged overmolded The compact PL-900 is available in cable assembly several power circuit configurations for Polarized Housing eliminates industrial and medical electronic appli- missmating cations. This connector series is ideal Up to 14 standard color for applications where safety, ease of combinations for coding use, and exposure to hostile environ- ments are of primary consideration. Performance (for harsh environments) Water Proof, seals to cable Packaging (intuitive, compact, configurable) Impact Resistant plastic housing Pulse-Lok auto-latch/quick-release Chemical Resistant mechanism confirms continuity Shock Proof housing design Concealed Contacts meet IEC and UL High Performance flex relief extends safety specifications cable life and strain relief Press & Seal contact system SPECIFICATIONS Electrical (see below) Flex Reliefs: TPR Environmental Mating Life: 5,000 cycles min. Contacts: Pins = Brass, Sockets = Bronze Alloy Operating Temp: -20C to +105C High Current Ratings per UL/ANSI/EIA Contact Plating: Gold per MIL-G-45204C Moisture Resistance: IP-67 (IEC) Dielectric Withstand Voltage: 2200V RMS Flammability Rating: UL94 V-0 (PL-900SM-V only- Mechanical (Contact to Contact, Contact to Outer see Mating Cycles: 20K cycles max Housing) Table B) Retention Force: Insulation Resistance: Per ANSI/EIA-364-14 Chemical Resistance: Common industrial sol- Mated Connectors: 50 lbs. Minimum vents Material Cable to Connector: to 50 lbs. typical (consult factory) Connector Housing: PL 900SM-N = Nylon Contact Barrel Wire Size: 12 to 22 Contact Isolation: Probe 7lb. Per IEC 60601-1 TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS Contact Size Contact Number of Poles Max Wire Gauge Rated Current Rated Voltage Pin f (mm) Resistance Up to 14 14 0.7 22 5 600V AC/DC < 10m ohms contact positions 12 0.7 22 5 600V AC/DC < 10m ohms 10 0.7 22 5 600V AC/DC < 10m ohms 7 1.5 16 15 600V AC/DC < 10m ohms 3 2.4 12 30 600V AC/DC < 10m ohms STANDARD HOUSING OPTIONS In-Line Receptacle Assembly Panel-Mount Receptacle Assembly In-Line Plug Assembly .90 f .90 f Mounts from back of panel to achievce an IP-67 seal - .460 typ 3.19 2.90 1.00 f Shown with overmold flex relief Panel thickness range = .063 to .250 Shown with overmolded flex relief (Refer to PLSeries Overmolding Guide) (Refer to PL Series Overmolding Guide) In-Line Receptacle (for overmolding) Panel-Mount Receptacle In-Line Plug (for overmolding) 1.00 typ. 2.0 typ. 2.31 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.aldenproducts.com/configurator All dimensions shown in inches. Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden specialist today. www.aldenproducts.com Pg. 1 2012 Amphenol Alden Pulse-Lok is a trademark of Amphenol Alden US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.PL-900SM-N SERIES Plastic Shell Auto-Coupling Connectors 14 Pole Capacity for High Power Applications TABLE B: STANDARD PART NUMBERS Number of In-Line Receptacle RPM Receptacle - PCB RPM Receptacle - SC In-Line Plug Poles 14 340196 340525 340518 340112 12 340182 340497 340490 340084 10 340168 340469 340462 340056 7 340154 n/a 340448 340028 3 340140 n/a 340434 340000 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector configurator located www.aldenproducts.com/configurator Options Include: Housing Color Options Black, Gray, White, Blue, Red, Green, Yellow Mating Key Options 2 Standard Keys, Proprietary Keys Available Standard Panel-Mount Thickness .187 Contact Termination Standard contact is equipped with a MIL crimp barrel suitable for soldering Panel-Mount, Cut-Out Template f .880 Assembly Instructions Al-PL900-03 In-Line Plug for overmolding 1.05 f Mounting AI-PL900-02 Panel-Mount Receptacle ring footprint Available at: www.aldenproducts.com .775 CONNECTOR ASSEMBLY TOOLS In-Line Plug Item Alden P/N Description Application 1 390057 22AWG Insertion Tool Pin to Plug Core In-Line Plug 2 T-831 16AWG Insertion Tool Pin to Plug Core 2 3 390020 12AWG Insertion Tool Pin to Plug Core 1 4 T-706 Loading Nest Plug Core Support Base 5 390040 Pneumatic Crimper Contact Termination Tool 6 390041 Stand for Pneumatic Contact Termination Tool Crimper 1 Plug Core 7 390035 Hand Crimper Contact Termination Tool 2 Plug Housing Assembly 8 390032 Size - 12 Crimp Die Contact Termination Tool 9 390031 Size - 16 Crimp Die Contact Termination Tool 10 390030 Size - 22 Crimp Die Contact Termination Tool Receptacle Item Alden P/N Description Application 1 390056 22AWG Insertion Tool Socket to Receptacle Core Disposable Receptacle 2 T-831 16AWG Insertion Tool Socket to Receptacle Core 3 390020 12AWG Insertion Tool Socket to Receptacle Core 2 4 T-705 Loading Nest Receptacle Core Support Base 1 5 T-701 Insertion Tool Receptacle Core to Housing 6 390040 Pneumatic Crimper Contact Termination Tool 7 390041 Stand for Pneumatic Contact Termination Tool 1 Receptacle Housing Crimper 2 Pin Insert 8 390035 Hand Crimper Contact Termination Tool 9 390032 Size - 12 Crimp Die Contact Termination Tool 10 390031 Size - 16 Crimp Die Contact Termination Tool 11 390030 Size - 22 Crimp Die Contact Termination Tool Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden specialist today. www.aldenproducts.com Pg. 2 2012 Amphenol Alden Pulse-Lok is a trademark of Amphenol Alden US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.