NUMBER TYPE BUS-12-071 PRODUCT SPECIFICATION TITLE PAGE REVISION Low Profile Jumper Gold or GXT Plated 1 of 15 G AUTHORIZED BY DATE 05/15/12 J.ZHOU CLASSIFICATION UNRESTRICTED 1.0 GENERAL Scope - This specification covers gold or gold flash over palladium alloy plated low profile jumper connectors designed for low power interconnection of two adjacent 0.025 inch square pins, free standing or in headers, on 0.100 inch centers. This specification is composed of the following sections. This product meets the requirements of the European Union Directive of Restrictions for Hazardous Substances (Directive 2002/95/EC). The specification is composed of the following sections. Paragraph Title Page 1.0 GENERAL 1 2.0 APPLICABLE DOCUMENTS 1 3.0 REQUIREMENTS 2 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and Construction 3 3.5 Electrical Characteristics 3 3.6 Mechanical Characteristics 6 3.7 Environmental Conditions 7 4.0 QUALITY ASSURANCE PROVISIONS 11 4.1 Equipment Calibration 11 4.2 Inspection Conditions 12 4.3 Qualification Inspections 12 4.4 Requalification Testing 13 5.0 NOTES AND DEFINITIONS 16 2.0 APPLICABLE DOCUMENTS The following documents, of the issue in effect on the date of the latest revision of this specification, shall form a part of this specification to the extent specified herein. Military Specifications MIL-M-24519 Molding Plastics, Polyester, Thermoplastics MIL-C-45662 Calibration System Requirements MIL-P-55110 Printed Wiring Boards MIL-G-45204 Gold Plating, Electrodeposited MIL-P-45209 Palladium Plating, Electrodeposited MIL-STD-202 Test Methods for Electronic and Electrical Component Parts MIL-STD-275 Printed Wiring for Electronic Equipment MIL-STD-1344 Test Methods for Electrical Connectors Federal Specifications QQ-N-290 Nickel Plating (Electrodeposited) QQ-B-750 Phosphor Bronze PDS: Rev :G STATUS:Released Printed: May 22, 2012 Copyright FCI Form E-3334 GS-01-001 Rev F NUMBER TYPE BUS-12-071 PRODUCT SPECIFICATION TITLE PAGE REVISION Low Profile Jumper Gold or GXT Plated 2 of 15 G AUTHORIZED BY DATE 05/15/12 J.ZHOU CLASSIFICATION UNRESTRICTED Industry Specifications/Standards ASTM B-103 Phosphor Bronze Plate, Sheet, Strip and Rolled Bar, Spec. for DOD ADOPTED UL-94 Tests for Flammability of Plastic Materials 3.0 REQUIREMENTS 3.1 Qualification Connectors furnished under this specification shall be products capable of meeting the qualification test requirements specified herein. 3.2 Material The material for each part shall be as specified herein, or equivalent. Substitute material shall meet the performance requirements of this specification. 3.2.1 Terminal. The body shall be 1/2 hard phosphor bronze strip C51000 in accordance with QQ-B-750 and CA-510 specification. 3.2.2 Insulator Housing. The housing material shall be unfilled Polyester in accordance with BUS-16-028. The material shall be rated flame retardant 94 V-O in accordance with UL- 94. or 3.2.3 Insulator Housing. The housing material shall be 17-20% glass filled Polyester in accordance with BUS-16-025. The material shall be rated flame retardant 94 V-0 in accordance with UL-94. 3.3 Finish 3.3.1 Terminal. 3.3.1.1 The terminal shall be plated in the contact area with 15 microinches (minimum) gold per MIL-G-45204 or a thin gold flash over 15 microinches (minimum) palladium alloy per MIL-P-45209, Type II, Grade C over 50 microinches (minimum) nickel per QQ-N-290, Class 2 3.3.1.2 The terminal shall be plated in the contact area with 30 microinches (minimum) gold per MIL-G-45204 or a thin gold flash over 27 microinches (minimum) palladium alloy per MIL-P-45209, Type II, Grade C over 50 microinches (minimum) nickel per QQ-N-290, Class 2. PDS: Rev :G STATUS:Released Printed: May 22, 2012 Copyright FCI Form E-3334 GS-01-001 Rev F