M85049/90-11W03 Amphenol

BAND LOCK ADAPTOR This is another method of termination of screens. A high quality band will do the job in this back shell. Tempered bands are tightened over the shields, which is pulled over the banding area, using special assembly tools. Suitable over cover by heat shrink boot or some other method as chosen by the designer could be used. Both crimp ring and banded terminations give a low DC resistance. For Connector Group Page No. J VII-1 K VII-2 L VII-3 M VII-4 N VII-5 (Page 7-11) Note: For Connector group Identification refer Table 1 - A, B, C, D and for Material / Plating Finish, Refer Table-2 (Page 12) email: sales backshellworld.com Amphenol Backshells VII www.backshellworld.comAmphenol Band Lock Adaptor 0 0 Connector Group - J Straight, 90 , 45 G J 4 Length 9 - for standard Length in table / figure NOTE: * For more cable entry and length options, contact factory TABLE - A AMPHENOL PART MIL PART NUMBER NUMBER DESIGNATOR DESIGNATOR +0.00 +0.00 G -0.02 -0.50 N/A N/A 0.56 14.22 N/A N/A 0.63 16.00 0.63 16.00 0.75 19.05 0.75 19.05 0.89 22.61 0.82 20.83 0.95 24.13 0.95 24.13 1.07 27.18 0.95 24.13 1.13 28.07 1.02 25.99 1.26 32.00 1.07 27.18 1.32 33.53 1.19 30.23 1.47 37.34 email: sales backshellworld.com Amphenol Backshells VII - 1 www.backshellworld.com G G Band Lock Adaptor