N15TS-103A3030 Amphenol

15mm Carbon Position Sensor/ Potentiometer N-15 FEATURES Conceived and designed for easy customisation. SMD or Through-hole Mount. Endless Rotation (360o). Wide Electrical Angle (340o 10o). Extended Mechanical Life (100k cycles). Working Temperature Range (-40oC to +120oC). Low Profile (4.4 mm). Linearity: 3% (default). Embossed Tape or Bulk packaging. Reflow Soldering capability. Shaft insertable from both sides. Polarised rotor (European Home Appliance standard). All PT/ PTC 15 shafts compatible. IP54 protection according to IEC 60529. STANDARD SPECIFICATIONS TYPICAL APPLICATIONS Resistance values*: 5k to 100k The N15 series offers an SMD and Through Hole mount Tolerance: 30% solution for the majority of Position/Rotary Sensor and Nominal Power: 0.15 W 50C multi-purpose Control applications such as: Linearity (absolute): 3% Taper: Linear - Automotive HVAC, Seat, Rear-view mirror actuator Mechanical Life**: 100K cycles feedback sensors and HVAC Controls Temperature Range: -40oC to +120oC -Temperature Control for Boilers, Wall Heaters, Showers, Mechanical Angle: 360o Radiators, Conventional and Microwave Ovens, Freezers... Electrical Angle: 340o 10o - Timer & Function/Programme Select for Washing Rotational Torque: 20 mN.m Max. Voltage: 250 VDC Machines, Dishwashers and all White Goods in general. - Size and Position detectors * Others: check availability ** 200K cycles version available check availability. For higher mechanical life see the Z15 product with 2M cycles. HOW TO ORDER N15 T S - 502 A 3030 Mounting Method Rotors Value Tolerance Series Taper N-15 T 3030 = 30% 502 = 5 K A = Lin. V =Through Hole . (See note 1) (See note 3) (See note 2) S = SMD . H = Horizontal Adjust 104 = 100 K (See note 4) (See note 5) NOTES: (1) A wide variety of custom substrates available (2) Availability of a wide range of customised tapers and step curves (3) Others: check availability. Optional precision laser-trimmed voltage divider calibration (4) Horizontal adjust versions will be studied case by case (5) Value Example: Code: 50 2 5K Numb of zeros First two digits of the value. Shafts are not available mounted to the potentiometer and should be ordered separately NOTE: The information contained here should be used for reference purposes only. www.piher.net -1-STANDARD WIPER POSITION HOW TO ORDER CUSTOM DRAWING Wiper positioned at 50 % of the electrical angle. 50% 10 + DRAWING NUMBER (Max. 16 digits) N-15 T S This way of ordering should be used for options which are not included in theHow to orde standard and optional extras. SMD MOUNT SOLDER FOOT - PRINT Download the STEP file here: