Portable reference source industrial monitoring kit REF2510R The ReferenceMate portable reference source enables users in the field to easily verify sensor performance and the integrity of the cabling between the sensor and the online system. A built-in reference accelerometer assures that a 1 g test level is maintained for sensors weighing up to 250 grams. Frequency of operation (61.4 Hz for imperial measurements, 100 Hz to confirm sensor calibration value, and 159.2 Hz for metric measurements) and measurement type (peak/RMS) are push button selected. The REF2510R kit includes all the accessories needed for simple vibration data collection. LEDs notify the user when battery condition falls below operational levels or if the unit is overloaded. For calibration verification, reference test points are provided to verify the output of the internal sensor. Key features Quickly and easily verify Included in the REF2510R kit: Frequency options sensor operation and cable Handheld shaker with protective boot integrity in the field Measurement 4x AA batteries types User-selectable operating Calibration sheet Belt clip frequency and measurement Wrench Frequency type (peak or RMS) Carrying case with foam insert selection 1/4-28 to 1/4-28 SF6 mounting stud Crossover frequencies for easy velocity verification Out of range Battery Selections retained after indicator indicator powering off Rugged boot offers protection in harsh industrial Front panel controls to make selections at the environments push of a button Up to 40 hours of battery life Manufactured in an approved ISO 9001 facility Certifications Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Tel: +1 (301) 330-8811 buy.wilcoxon.com Frederick, MD 21701 Fax: +1 (301) 330-8873 An Amphenol Company www.wilcoxon.com USA info wilcoxon.com 99189 Rev.D.1 09/19 1Portable reference source industrial monitoring kit REF2510R SPECIFICATIONS 1 Operating frequency , 1.5% 61.4 Hz 100.0 Hz 159.2 Hz 2 2 2 2 Acceleration output , 3% 1.0 g (9.81 m/s ) 1.0 g (9.81 m/s ) 1.0 g (9.81 m/s ) 2 Velocity output 1.0 ips (25.4 mm/s) 0.61 ips (15.6 mm/s) 0.39 ips (9.8 mm/s) 2 Displacement output 2.6 mils (65.9 m) 0.98 mils (24.8 m) 0.39 mils (9.8 m) 3 Operating cycles, 250 gram load 1,280 320 240 Mounting thread 1/4-28 female Mounting torque, max 10 in-lb (112 N-cm) Distortion, 100-250 gram load 7% Load, min to max none to 8.8 oz (250 grams) Automatic switch off time approx. 90 10 sec defeatable Temperature range: Operating 10 to +55C (+15 to +130F) Storage 40 to +85C (40 to +185F) Ramp-up time 3 sec Internal battery 4x AA alkaline batteries DC power 6 VDC 5%, 1A, center positive Shaker dimensions diameter: 2.59 in. (6.6 cm), height: 10.33 in. (26.2 cm) Weight, with batteries 900 grams (32 oz) Case material 6061 aluminum, black hard-coated anodized IP rating IP54 Boot material thermoplastic rubber Meggitt Shaker Boot Dimensions 03/19/2014 1 Notes: User-selectable. Optional accessories: REF001 universal mounting kit REF002 metric mounting kit REF003 2 Peak or RMS. universal AC adaptor MD055 two-pole magnet TAA01 triaxial accelerometer angled adaptor 3 Using supplied alkaline batteries. 0.35 in. 0.9 cm 0.35 in 10.33 in. 10.33 in 26.2 cm 3.43 in. 3.43 in 8.7 cm 2.59 in. 2.59 in 6.6 cm 1.16 in 6.96 in6.96 in. 2.20 in. 2.20 in 1.16 in. 17.7 cm 5.6 cm 2.9 cm Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Tel: +1 (301) 330-8811 buy.wilcoxon.com Frederick, MD 21701 Fax: +1 (301) 330-8873 An Amphenol Company www.wilcoxon.com USA info wilcoxon.com 99189 Rev.D.1 09/19 2