VG96912L14 Amphenol

Amphenol Series SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003Ordering information Ordering example: SJT P G 06 RT 14-35 A 014 Surface treatment/ Series (p. 9, 15, 18) Modifications SJT Scoop proof 014 Standard surface treatment: (100% scoop-proof) Nickel-plated, cadmium-plated, Junior olive green (Miniature version) chromate coating (conductive). Tri-Lock (Three pin bayonet coupling) Other surface treatments upon With crimp, solder (hermet.), request. GS dip solder, and wire wrap With connector modifications, contacts the modification designation is shown here. In such cases, the surface treatment is included in the designation G Grounding fingers (Grounding ring) Modifications upon request. Only with design type 06 (p. 13) Coding (p. 4) Design type (p. 10 to 22) Coding of connectors is possible with 5 angular positions of the main 00 Receptacle with square flange guide groove: 01 Cable connecting plug 06 Plug Normal position and angles A, B, C, D. 07 Receptacle with single hole No specification for normal position mounting required. I Receptacle with solder flange (only hermetic) Contact type P Pin contact (PIN) Service class (p. 9, 15, 18) S Socket contact (Socket) RT Moistur e-proof version. Rear removable crimp contacts. Rear thread and teeth for backshells. Y Hermetically sealed version. Non-removable solder contacts (pin contacts). GS Moistur e-proof version. Rear removable contacts Contact arrangement (p. 5-7) for soldering into printed circuit boards. The contact arrangements are listed in the table and underneath the WW Moisture-proof version. corresponding contact arrangement Non-removable contacts image. They consist of a double with wire-wrap connection. designation (14-35), in which the first of the two numbers always indicates the size of shell. Backshells must be ordered separately using the order numbers shown on pages 26 and 27.