Data Sheet RC-120S Closet-light type relay (2 wire) Each Remcon relay, unlike any other low voltage relay, has a built-in transformer for unit control. Each relay in the system operates independently from and has no effect upon other relays. You can economically install as little as one relay and operate it with as many switches as is desired. Relay cannot burn out if low voltage switch legs are shorted * Where code permits ** Only two wires for closet light relay Switches AC power ON and OFF using low voltage control circuit Single relay can be controlled by multiple switches and multiple relays can be controlled by single switch No hassle Light 22 gauge cable can be used to control relay instead warranty of Romex or armored cable significant time & cost No waiting. savings No shipping Built in transformer, no step down transformers necessary charges. AC Voltage from 105 to 125 V Our commitment to AC Current up to 6.5 A (1/4 HP max motor load at 120 V) high-quality products and customer service Frequency: 60 Hz is demonstrated by Safe control switching: 10 V DC max and 10 milliamps max our industry exclusive No Hassle warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: 500 MSLP limit) Amprobe Test Tools www.Amprobe.comData Sheet RC-120S Closet-light type relay (2 wire) Applications Industrial Control Applications Where isolated low voltage is needed for safety reasons Higher current applications (up to 6.5 amps, 1/2 HP) Long distance remote operations Hostile or hazardous environments Alarms Plant process controls Computer control applications Reduce control wiring costs and electrical inteference Economically meet building codes in new installations Applications where UL listed device is required. Optional Accessories Part Number Description RE-SW Switch MB-1 Mounting bracket STA-1 Solder-less connector SPR-1 Switch plate, 1 gang Brushed Stainless Steel (can be painted) SPR-2 Switch plate, 2 gang Brushed Stainless Steel (can be painted) SPR-3 Switch plate, 3 gang Brushed Stainless Steel (can be painted) Amprobe Test Tools Amprobe Test Tools Europe website: www.Amprobe.com Amprobe Test Tools Europe email: info amprobe.com Beha-Amprobe GmbH Everett, WA 98203 In den Engematten 14 Tel: 877-AMPROBE 79286 Glottertal, Germany 2009 Amprobe Test Tools. All rights reserved. 03/2009 3465234 Rev A Tel.: +49 (0) 7684 8009 - 0 Amprobe Test Tools www.Amprobe.com