SH-120 SERIES WALL MOUNT WEATHER PROOF SELECT-A-STROBE/HORN UL Listed 120 VAC operation Outdoor and indoor 6 sound output settings Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting Low current draw BBX-5 weather proof backbox included The SH-120 Series Select-A-Strobe/Horn is designed to flow switches, and sprinkler systems for residential, commercial provide audible and/or visual signals for fire and burglar alarm and industrial applications. protection systems and notification signals for the purpose of life The SH Series combines a selective three horn tone and provides safety and protection. a continuous tone or temporal pattern (code 3) when constant voltage is applied. The SH-120 are operable with a 120 VAC system between 96 VAC and 132 VAC. They can be interfaced with pull stations, This series is available with a red or white housing and a clear lens. Installation Note: Installation must comply in accordance with applicable standards. OPTIONAL BBK-1 OUTDOOR BOX DWG 15-1 Ordering Information Stock Number Model Number Description Color 4710030 SH-120R Selectable strobe/horn/chime Red 4710031 SH-120W Selectable strobe/horn/chime White 4270048 Red BBX-5 Back box (included) 4270049 White 1500001 BBK-1 Bell back box Red Engineering Specifications have a universal pre-wire mounting plate for the ease of connection. The contractor shall provide and install a Potter SH-120 strobe/ The universal back plate shall allow for connection to a single gang, horn. The unit shall operate on a nominal 120 VAC input and have a double gang, 4 square standard or deep box, BBK-1 weather proof selectable horn setting. The unit shall be listed to UL standard 1638, bell back box or the BBX-5 custom weather proof back box. The horn General Signaling for indoor and outdoor applications. The strobe shall be listed to UL standard 464, Audible Signaling devices. shall have a 110 candela rating. The unit shall include a weather proof back box as part of the standard package. The device shall Potter Electric Signal Co., LLC St. Louis, MO Cust Service: 866-240-1870 Tech Support:866-956-1211 Canada 888-882-1833 www.pottersignal.com PRINTED IN USA MKT. 8910015 - REV B PAGE 1 OF 2 7/10SH-120 SERIES WALL MOUNT WEATHER PROOF SELECT-A-STROBE/HORN Wiring Diagram Dimensions: inches (mm) SL-120 Control Panel To Next Appliance AC+ AC- 5 (127) Power 3.374 (85.7) Back View DWG 891-2 DWG 16-2 OPTIONAL BBX-5 OUTDOOR BACK BOX 3.374 (85.7) 5.5 (139.7) High voltage may be present inside the light assembly even though power is not connected. If access to the component board Back View is required (removal or replacement), the capacitor must be Front View 6.208 (157.7) Includes 4 ea. discarged by touching a wire to both ends of the flashtube. 8-32 x screws DO NOT attempt to touch or move the assembly until the Bottom View capacitor has been discharged. DWG 891-1 Specifications Max RMS Operating Operating Rated Light Flash Construction Series Operating Current Voltage Temperature Materials Voltage Output Rate Type (mArms) Range Range N/A 120 VAC 110 cd 72 per -40F to 151F indoor/ ABS housing, SH-120 (current varies 96-132 VAC 60Hz on axis min. (-40C to 66C) outdoor polycarbonate lens with horn setting) Switch Setting Max. RMS dBA Reverberant ON: 1 OFF: 0 Series Pattern Tone OperatingCurrent Ratings per UL 464 (mArms) (dBA 10Ft) SW1 SW2 SW3 2400Hz 1 1 1 115 87.7 Electro Steady 1 0 1 119 87.8 Mechanical Broadband 0 1 1 115 88.2 SH-120 2400Hz 1 1 0 111 81.1 Electro Temporal 1 0 0 112 83.4 Mechanical Broadband 0 1 0 110 83.4 PRINTED IN USA MKT. 8910015 - REV B PAGE 2 OF 2 7/10 6 5/64 (154.4) 2 5/16 (59) 3.374 (85.7) 6.515 (165.5) 0.905 (23) 2 (50.8) 3.374 (85.7)