HMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Typical Applications Features Phase-Locked Oscillator for: Pout: +9 dBm VSAT Radio Phase Noise: -110 dBc/Hz 100 KHz Typ. Point-to-Point & Point-to-Multi-Point Radio Single Supply: +5V 340 mA +12V 28 mA Test Equipment & Industrial Controls 2 24 Lead 4x4mm QFN Package: 9 mm Military End-Use Functional Diagram General Description The HMC535LP4 & HMC535LP4E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC PLOs. The PLOs phase noise performance is excellent over temperature, shock, and process due to the oscillators monolithic structure. Power output is +9 dBm typical from a +5V supply voltage. All fun- 12 ctions (VCO, Op-Amp, PFD, Prescaler) are fully integrated while providing allowances for off-chip customer spec ific loop components. The PLO MMIC accepts a single-ended or a differential reference oscillator input signal in the range of 230 to 240 MHz, and a digital Lock Detector (LD) output is provided to con firm the status of the loop. The phase-locked oscillator is packaged in a leadless QFN 4 x 4 mm surface mount package. Electrical Specifi cations, T = +25 C A Parameter Min. Typ. Max. Units Power Supplies: VCO Voltage Vcc1 5 V VCO Current Icc1 172 mA Op-Amp Voltage Vcc2 12 V Op-Amp Current Icc2 28 mA Digital Voltage Vcc3 5 V Digital Current Icc3 168 mA PLO Characteristics: RF Operating Freq. 14.7 15.4 GHz RF Power 6 9 dBm Reference Input Freq. 229.69 240.62 MHz Reference Input Power 0 5 10 dBm RF Phase Noise 100 KHz offset -110 dBc/Hz Locking Time Loop BW = 1 MHz 20 s Lock Detect Output Locked 0.3 0.5 V ave Unlocked 0.7 1.0 V ave Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 12 - 162 Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com PLOS - SMTHMC535LP4 / 535LP4E v01.1009 PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz Electrical Specifi cations, (Continued) Parameter Min. Typ. Max. Units VCO Characteristics: RF Operating Freq. 14.7 15.4 GHz RF Power 6 9 dBm RF Tuning Sensitivity V +2 to +9.5 V 160 MHz/V tune V 0 to +2 V 590 MHz/V tune V +9.5 to +12 V 50 MHz/V tune Tuning Voltage Leakage Current V +2 to +9.5 V 25 A tune RF Phase Noise 100 kHz offset -108 dBc/Hz RF Harmonics 1/2 F -20 dBc OP 3/2 F -35 dBc OP 4/2 F -8 dBc OP 5/2 F -25 dBc OP RF Pushing -125 MHz/V RF Pulling VSWR 2:1 any phase 10 MHz RF Drift Rate VT input 20 MHz/ C VCO 3 dB Modulator Bandwidth 30 MHz Phase Frequency Detector: REF Input Capacitance 10 pF REF Input Resistance 50 Ohm REF Input VSWR Referenced to 50 Ohms 2:1 12 Output High Voltage Vcc3 V Output Low Voltage Vcc3 -1.9 Vcc3 -1.95 Vcc3 -2 V Phase Noise -150 dBc/Hz Op-Amp Characteristics: Input Offset Voltage V = 2.5V, 5.2V 1 mV CM Input bias Current V = 2.5V, 5.2V 5 A CM Large-Signal Voltage Gain Open Loop, No Load 69 dB Common Mode Rejection Ratio V = 2.5V 104 dB CM Frequency = 1 MHz Input Common Mode Range 2.5 5.2 V Power Supply Rejection Ratio V = 2.5V 63 dB CM Frequency = 1 MHz Output Voltage Swing Low No Load, 0.8 1.2 V I = 5 mA 0.81 1.2 V SINK Output Voltage Swing High No Load 10 10.5 V I = 5 mA 10 10.2 V SOURCE Gain Bandwidth Product Frequency = 6 MHz 400 MHz Slew Rate A = 10, No Load 146 V/s V V = 10V O Phase Margin Open Loop 110 Deg Input Voltage Noise Frequency = 10 kHz 1.6 nV / sqrt (Hz) Prescaler (Divider) Characteristics: Prescaler Division 64 Phase Noise -156 dBc/Hz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 12 - 163 Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com PLOS - SMT