Ships to you betweenFri. 03 May to Wed. 08 May
AD654JNZ Analog Devices
Ships to you between Fri. 26 Apr to Thu. 02 May
- HMC272AMS8E Mixer 1.7GHz ~ 3GHz Evaluation Board Stock : 0
Analog Devices Hittite RF Development Tools Eval PCB Stock : 0
Analog Devices Hittite Clock & Timer Development Tools Eval PCB Stock : 0
RF Development Tools HMC493LP3 Evaluation PCB Stock : 0
Sub-GHz Development Tools HMC454ST89 Evaluation PCB, 900 MHz Stock : 0
RF Development Tools HMC591LP5 Evaluation PCB Stock : 0
RF Development Tools HMC443LP4 Evaluation PCB Stock : 0
RF Development Tools HMC550A EVALUATION PCB ASSEMBLY Stock : 0
Analog Devices Voltage to Frequency & Frequency to Voltage IC VF CONVERTER Stock : 1
Volt to Frequency and Frequency to Volt Converter IC 100 kHz ±0.05% 14-PDIP Stock : 20
Analog Devices Voltage to Frequency & Frequency to Voltage Low-Cost SGL-Supply SGL-Ch Sync Stock : 0
Analog Devices Voltage to Frequency & Frequency to Voltage IC SYNC VF CONVERTR Stock : 0
Volt to Frequency and Frequency to Volt Converter IC 100 kHz ±0.25% 14-PDIP Stock : 1
Analog Devices Voltage to Frequency & Frequency to Voltage IC MONO VF CNVTR Stock : 0
Analog Devices Voltage to Frequency & Frequency to Voltage SYNC VF CONVERTR Stock : 87
Voltage to Frequency & Frequency to Voltage Frequency to Voltage Converter for ground or supply referred load up to 50-mA (with zener regulator) 8-SOIC -40 to 85 Stock : 0
The AD654JNZ is a voltage to frequency and frequency to voltage synchronous converter manufactured by Analog Devices. It is a versatile, easy-to-use, precision converter that can be used for isolated signal transmission, level conversion, and phase-locked loop operation. The device provides temperature-stable DC accuracy over a wide range of temperatures and supports both low frequency and high-frequency applications. It features two control inputs for synchronization and frequency selection, allowing for low-to-high or high-to-low frequency transition control. The output can be synchronized with an external reference signal (master clock) or can be an open-loop output in order to frequency-modulate an internal oscillator.
