3.5 GSPS Direct Digital Synthesizer with 12-Bit DAC Data Sheet AD9914 FEATURES FUNCTIONAL BLOCK DIAGRAM 3.5 GSPS internal clock speed AD9914 HIGH SPEED PARALLEL Integrated 12-bit DAC MODULATION PORT Frequency tuning resolution to 190 pHz 16-bit phase tuning resolution 12-bit amplitude scaling Programmable modulus Automatic linear and nonlinear frequency sweeping LINEAR SWEEP 3.5GSPS DDS CORE 12-BIT DAC capability BLOCK 32-bit parallel datapath interface 8 frequency/phase offset profiles Phase noise: 128 dBc/Hz (1 kHz offset at 1396 MHz) Wideband SFDR < 50 dBc Serial or parallel input/output control REF CLK TIMING AND CONTROL MULTIPLIER 1.8 V/3.3 V power supplies Software and hardware controlled power-down 88-lead LFCSP package PLL REF CLK multiplier SERIAL OR PARALLEL Phase modulation capability DATA PORT Amplitude modulation capability Figure 1. APPLICATIONS Agile LO frequency synthesis Programmable clock generator FM chirp source for radar and scanning systems Test and measurement equipment Acousto-optic device drivers Polar modulator Fast frequency hopping Rev. F Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20122016 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Technical Support www.analog.com Trademarks and registered trademarks are the property of their respective owners. 10836-001AD9914 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 12-Bit DAC Output .................................................................... 20 Applications ....................................................................................... 1 DAC Calibration Output ........................................................... 20 Functional Block Diagram .............................................................. 1 Reconstruction Filter ................................................................. 20 Revision History ............................................................................... 2 REF CLK Clock Input (REF CLK/ ) ........................................ 21 General Description ......................................................................... 3 PLL Lock Indication .................................................................. 22 Specifications ..................................................................................... 4 Output Shift Keying (OSK) ....................................................... 22 DC Specifications ......................................................................... 4 Digital Ramp Generator (DRG) ............................................... 23 AC Specifications .......................................................................... 5 Power-Down Control ................................................................ 27 Absolute Maximum Ratings ............................................................ 8 Programming and Function Pins ................................................. 28 Thermal Performance .................................................................. 8 Serial Programming ....................................................................... 31 ESD Caution .................................................................................. 8 Control InterfaceSerial Input/Output ................................. 31 Pin Configuration and Function Descriptions ............................. 9 General Serial Input/Output Operation .................................. 31 Typical Performance Characteristics ........................................... 12 Instruction Byte .......................................................................... 31 Equivalent Circuits ......................................................................... 16 Serial Input/Output Port Pin Descriptions ............................. 31 Theory of Operation ...................................................................... 17 Serial Input/Output Timing Diagrams .................................... 32 Single Tone Mode ....................................................................... 17 MSB/LSB Transfers .................................................................... 32 Profile Modulation Mode .......................................................... 17 Parallel Programming (8-/16-Bit) ................................................ 33 Digital Ramp Modulation Mode .............................................. 17 Register Map and Bit Descriptions .............................................. 34 Parallel Data Port Modulation Mode ....................................... 17 Register Bit Descriptions ........................................................... 39 Programmable Modulus Mode ................................................. 17 Outline Dimensions ....................................................................... 45 Mode Priority .............................................................................. 18 Ordering Guide .......................................................................... 45 Functional Block Detail ................................................................. 19 DDS Core ..................................................................................... 19 REVISION HISTORY 6/2016Rev. E to Rev. F 7/2013Rev. A to Rev. B Changes to Figure 19 ...................................................................... 14 Change to CMOS Logic Outputs Parameter, Table 1 ................... 4 Changes to Table 2 ............................................................................. 7 1/2016Rev. D to Rev. E Changes to DDS Core Section ...................................................... 19 Changes to DDS Core Section ...................................................... 19 Changes to Phase-Locked Loop (PLL) Multiplier Section ....... 21 Change to Figure 30 ....................................................................... 19 Changed PLL Charge Pump Section to PLL Charge Pump/ Updated Outline Dimensions ....................................................... 45 Total Feedback Divider Section Changes to Table 8, PLL Loop Filter Components Section, and Figure 34 ....................... 22 1/2014Rev. C to Rev. D Change to Table 14 ......................................................................... 34 Changes to Digital Timing Specifications Parameter, Table 2 .... 5 Changes to Bits 15:8 , Table 17 ................................................... 42 Changes to Figure 23 ...................................................................... 15 Change to DAC Calibration Output Section .............................. 20 8/2012Rev. 0 to Rev. A Change to Address 0x02, Table 14 ................................................ 34 Changes to Features Section ............................................................ 1 Changes to Table 17 ........................................................................ 41 Changed Differential Input Voltage Unit from mV p-p to V p-p ..... 4 Changes to Table 14 ....................................................................... 34 11/2013Rev. B to Rev. C Changes to Table 16 ....................................................................... 40 Changes to Table 2 ............................................................................ 5 Changes to Table 28 ....................................................................... 44 Change to Programming and Function Pins Section ................ 30 Updated Outline Dimensions ....................................................... 45 7/2012Revision 0: Initial Version Rev. F Page 2 of 45