EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. MAX13053A +5V, 2Mbps CAN Transceiver with 65V MAX13054A Fault Protection, 25V CMR, and 25kV ESD General Description Benefits and Features The MAX13053A and MAX13054A are +5V CAN (Control Integrated Protection Increases Robustness Area Network) transceivers with integrated protection 65V Fault Tolerant CANH and CANL for industrial applications. These devices have extended 25kV ESD HBM (Human Body Model) 25V Extended Common Mode Input Range 65V fault protection for equipment where overvoltage protection is required. It also incorporates high 25kV (CMR) Transmitter Dominant Timeout Prevents Lockup ESD HBM and an input common mode range (CMR) of 25V, exceeding the ISO11898 specification of -2V to Short-Circuit Protection Thermal Shutdown +7V. This makes these parts well suited for applications that are in electrically noisy environments, where the Family Provides Flexible Design Options ground planes are shifting relative to each other. This Slow Slew Rate to Minimize EMI family features a variety of options to address common Silent Mode S Disables Transmitter CAN application requirements logic-level supply input STBY Input for Low-Current Mode V for interfacing with 1.62V to 5.5V logic, low-current L 1.62V to 5.5V Logic-Supply (V ) Range L standby mode, silent-mode to disable the transmitter, and High-Speed Operation of Up to 2Mbps a slow slew rate to minimize EMI. Operating Temperature Range of -40C to +125C in These devices operate at a high-speed CAN data rate, 8-pin SOIC Package allowing up to 2Mbps on small networks. Maximum speed on large networks may be limited by the number of nodes in a network, type of cabling, stub length, and other factors. Ordering Information appears at end of data sheet. These transceivers include a dominant timeout to prevent bus lockup caused by controller error or by a fault on the TXD input. When TXD remains in the dominant state (low) for longer than T , the driver is switched to the DOM recessive state, releasing the bus. The MAX13053A features a S pin where it enables and disables the transmitter for applications where you need the transceiver to receive only. The MAX13054A features a STBY pin for 3 modes of operation standby mode for low current consumption, normal high speed mode, or a slow slew rate mode when an external 26.1k is connected between ground and STBY pin. The MAX13053A and MAX13054A are available in a standard 8-pin SOIC package, and operate over the -40C to +125C temperature range. Applications Programmable Logic Instrumentation Controller Smart Grid Equipment Industrial Automation Drone Building Automation Motor Control 19-100205 Rev 1 5/18MAX13053A +5V, 2Mbps CAN Transceiver with 65V MAX13054A Fault Protection, 25V CMR, and 25kV ESD Simplified Block Diagram V DD MAX13053A/ MAX13054A THERMAL SHUTDOWN V L CANH PROTECTION CANL TXD DOMINANT DRIVER PROTECTION TIMEOUT STBY/S WAKE-UP MODE CONTROL WAKE-UP FILTER RXD DRIVER MUX GND Maxim Integrated 2 www.maximintegrated.com LEVEL SHIFTER