EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. MAX96700 14-Bit GMSL Deserializer with Coax or STP Cable Input General Description Benefits and Features The MAX96700 is a compact deserializer especially suit- Ideal for Safety Camera Applications ed for automotive camera applications. Features include Works with Low-Cost 50 Coax (100 STP) Cables adaptive equalization and an output crosspoint switch. An Error Detection of Video/Control Data embedded control channel operates at 9.6kbps to 1Mbps High-Immunity Mode for Robust Control-Channel 2 2 in UART, I C, and mixed UART/I C modes, allowing pro- EMC Tolerance gramming of serializer, deserializer (SerDes), and camera Retransmission of Control Data Upon Error registers, independent of video timing. Best-in-Class Supply Current: 190mA (max) The deserializer can track data from a spread- Adaptive Equalization for 15m Cables at Full Speed 32-Pin (5mm x 5mm) TQFN Package spectrum serial input. The serial input meets ISO 10605 Horizontal- and Vertical-Sync Encoding and IEC 61000-4-2 ESD standards. The core supply and Tracking range is 1.7V to 1.9V and the I/O supply range is 1.7V High-Speed Deserialization for Megapixel Cameras to 3.6V. The device is available in a 32-pin (5mm x 5mm) TQFN package with 0.5mm lead pitch, and operates over Up to 1.74Gbps Serial-Bit Rate the -40C to +115C temperature range. 6.25MHz to 87MHz x 12-Bit + H/V Data 36.66MHz to 116MHz x 12-Bit + H/V Data Applications (through Internal Encoding) Automotive Camera Applications Multiple Modes for System Flexibility 2 9.6kbps to 1Mbps Control Channel in UART, I C 2 (with Clock Stretch), or UART-to-I C Modes 2:1 Input Mux for Camera Selection Simplified Block Diagram 2 15 Hardware-Selectable I C-Device Addresses Pairs with Any Maxim GMSL Serializer Crosspoint Switch Maps Data to Any Output VIDEO VIDEO Reduces EMI and Shielding Requirements Spread-Spectrum Serial-Input Tracking and Transfer CAM MAX96701 MAX96700 GPU to the Parallel Output 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply 2 2 I C I C Peripheral Features for System Verification Built-In PRBS Receiver for BER Testing Eye-Width Monitor Allows In-System Test of High-Speed Serial Link Dedicated Up/Down GPI for Camera Frame-Sync Trigger and Other Uses Meets AEC-Q100 Automotive Specification -40C to +115C Operating Temperature Range 8kV Contact and 15kV Air IEC 61000-4-2 and Ordering Information appears at end of data sheet. ISO 10605 ESD Protection 19-100065 Rev 0 6/17MAX96700 14-Bit GMSL Deserializer with Coax or STP Cable Input TABLE OF CONTENTS General Description ............................................................................ 1 Applications .................................................................................. 1 Benefits and Features .......................................................................... 1 Simplified Block Diagram........................................................................ 1 Absolute Maximum Ratings ...................................................................... 6 Package Thermal Characteristics ................................................................. 6 32-Pin TQFN-EP . 6 DC Electrical Characteristics ..................................................................... 7 AC Electrical Characteristics 12 Typical Operating Characteristics ................................................................ 15 Pin Configuration ............................................................................. 16 Pin Description ............................................................................... 17 Functional Diagrams .......................................................................... 20 Detailed Description........................................................................... 26 Serial Link Signaling and Data Format . 26 Operating Modes . 26 Video/Configuration Link . 26 Single and Double Modes of Operation . 26 HS/VS Encoding . 26 Error Detection . 26 Bus Widths 27 Control Channel and Register Programming 30 Forward Control Channel . 30 Reverse Control Channel . 30 UART Interface 30 2 I C Interface 30 Remote-End Operation 30 Clock-Stretch Timing 30 2 Packet-Based I C 30 Packet Protocol Summary 31 Control-Channel Error Detection and Packet Retransmission 31 GPO/GPI Control . 31 Adaptive Line Equalizer 31 Eye-Width Monitor . 31 Spread-Spectrum Tracking 31 Cable-Type Configuration and Input MUX 31 Crosspoint Switch . 32 Maxim Integrated 2 www.maximintegrated.com