Model 060120A25X50-2 Chip Termination 10 Watts, 50 Description The 060120A25X50-2 is high performance Alumina (Al 0) Chip 2 3 termination intended as a low cost alternative to Aluminum Oxide (AlN). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS.. The termination is also RoHS compliant General Specifications Features: Resistive Element Thick film RoHS Compliant Substrate Al O Ceramic 2 3 Terminal Finish Matte Tin over Nickel Barrier 10 Watts Operating Temperature -55 to +125 C (see de rating chart) DC 6.0 GHz Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. Al 0 Ceramic 2 3 Electrical Specifications Non - Nichrome Resistive Resistance Value: 50 Ohms, 2% Element 10 Watts Power: Low VSWR Frequency Range: DC 6.0 GHz 100% Tested Return Loss >19 dB to 6.0 GHz Specification based on unit properly installed using suggested mounting instructions Small Size and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 +44 2392-232392 Europe: Model 060120A25X50-2 Typical Performance: 060120A25X50-2 060120A25X50-2 Power De-rating: Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application 2 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 Europe: +44 2392-232392