B0310J50100AHF

Model B0310J50100AHF Rev C Ultra Low Profile 0805 Balun 50 to 100 Balanced Description The B0310J50100AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets in an easy to use surface mount. The B0310J50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional wire wound baluns. The B0310J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance*. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0310J50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features: Parameter Min. Typ. Max Unit 300 1000 MHz Frequency 300 1000 MHz 0.7mm Height Profile Unbalanced Port Impedance 50 50 Ohm to 2 x 50 Ohm Balanced Port Impedance 100 Surface Mountable Return Loss 8.1 9.4 dB Tape & Reel Non-conductive Surface Insertion Loss* 0.8 1.0 dB RoHS Compliant Amplitude Balance 2.5 2.8 dB Halogen Free Phase Balance 34 36 Degrees CMRR 9 dB Power Handling 85C 2.0 Watts Power Handling 105C 1.2 Watts Operating Temperature -55 +105 C * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 4x 0.65 0.760.08 3 2.040.10 1 2 2x 0.15 1.290.10 6x 0.98 6x 0.22 6 5 4 6x Orientation Marker Orientation Marker 0.30 Denotes Pin Location Denotes Pin Location Pin Designation 1 Unbalanced Port 2 GND 3 Balanced Port Mechanical Outline 4 Balanced Port -Dimensions are in Millimeters 5 Do not connect 6 NC USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 Europe: +44 2392-232392 www.Anaren.com Asia: +86 512-62749282 Mode l B0310J50100A0HF Rev C Typical Performance: 200 MHz. to 1100 MHz. Return Loss - Input Insertion Loss 0 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -18 -1.8 -21 -2.1 -24 -2.4 -2.7 -27 -3 -30 -33 -3.3 -36 -3.6 Frequency MHz Frequency MHz Amplitude Balance Phase Balance 50 4 40 3 30 2 20 1 10 0 0 -10 -1 -20 -2 -30 -3 -40 -4 -50 Frequency MHz Frequency MHz CMRR 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 Frequency MHz USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 Europe: +44 2392-232392 www.Anaren.com Asia: +86 512-62749282 dB dB dB 200 200 200 300 300 300 400 400 400 500 500 500 600 600 600 700 700 700 800 800 800 900 900 900 1000 1000 1000 1100 1100 1100 deg dB 200 200 300 300 400 400 500 500 600 600 700 700 800 800 900 900 1000 1000 1100 1100