B0430J50100AHF Anaren

Model B0430J50100AHF Rev E PRELIMINARY Ultra Low Profile 0805 Balun 50 to 100 Balanced Description The B0430J50100AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed specifically for differential inputs and output locations on next generation A to D and D to A Converter ICs in an easy to use surface mount package, covering 400 MHz3000 MHz. The B0430J50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional wire wound baluns. The B0430J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0430J50100AHF is available on tape and reel for pick and place high volume manufacturing. Note that for optimal performance, the B0430J50100AHF should be used with a 10 pF series capacitor on the unbalanced port as shown in p. 2 & 3. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25 C) ROOM (25 C) Features: Parameter Min. Typ. Max Min. Typ. Max Unit 400 3000 MHz Frequency 400 2500 2501 3000 MHz 0.7mm Height Profile Unbalanced Port Impedance 50 50 50 Ohm to 2 x 50 Ohm Balanced Port Impedance 100 100 Low Insertion Loss Return Loss 8.4 10.3 7 7.3 dB Designed for A-D and D-A Converters Insertion Loss* 1.7 3.0 2.6 4.0 dB Surface Mountable Amplitude Balance 0.7 1.4 0.7 1.4 dB Tape & Reel Phase Balance 7 12 7 12 Degrees Non-conductive Surface CMRR 25 25 dB RoHS Compliant Power Handling 85C 0.4 0.4 Watts Halogen Free Operating Temperature -55 +105 -55 +105 C * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 0.640.06 1 2 3 2.040.10 2x 0.15 1.290.10 6x 0.98 6x 0.22 6 5 4 Orientation Marker 6x Orientation Marker Denotes Pin Location 0.30 Denotes Pin Location 4x 0.65 Pin Designation 1 GND 2 Unbalanced 3 GND Mechanical Outline 4 Balanced Port -Dimensions are in Millimeters 5 NC 6 Balanced Port USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 Europe: +44 2392-232392 www.Anaren.com Asia: +86 512-62749282 Model B0 430J50100AHF Rev E Typical Performance: 300 MHz. to 3100 MHz. with an external 10 pF capacitor on pin 2 Return Loss - Input Insertion Loss 0 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -18 -1.8 -21 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 -36 -3.6 Frequency MHz Frequency MHz Amplitude Balance Phase Balance 20 2 15 1.5 10 1 0.5 5 0 0 -5 -0.5 -10 -1 -1.5 -15 -2 -20 Frequency MHz Frequency MHz CMRR 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 Frequency MHz USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 Europe: +44 2392-232392 www.Anaren.com Asia: +86 512-62749282 dB dB dB 300 300 300 500 500 500 700 700 700 900 900 900 1100 1100 1100 1300 1300 1300 1500 1500 1500 1700 1700 1700 1900 1900 1900 2100 2100 2100 2300 2300 2300 2500 2500 2500 2700 2700 2700 2900 2900 2900 3100 3100 3100 deg dB 300 300 500 500 700 700 900 900 1100 1100 1300 1300 1500 1500 1700 1700 1900 1900 2100 2100 2300 2300 2500 2500 2700 2700 2900 2900 3100 3100