Model C150N50Z4 Surface Mount Termination 150 Watts, 50 Description The C150N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 Features: degree couplers and for use in microstrip circuits. The termination is also RoHS compliant RoHS Compliant General Specifications 150 Watts Resistive Element Thick film DC 4.0 GHz Substrate AlN Ceramic AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Non-Nichrome Resistive Operating Temperature -50 to +200C (see de rating chart) Element Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. Low VSWR Electrical Specifications 100% Tested Resistance Value: 50 Ohms, 2% Small Size Power: 150 Watts Frequency Range: DC 4.0 GHz >24 dB DC - 2.7 GHz Return Loss >20 dB DC - 4.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Toll Free: (800) 544-2414 Place Manufacturing. +44 2392-232392 Europe: Model C150N50Z4 Typical Performance: C150N50Z4 C150N50Z4 Power De-rating: Tape & Reel: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: 2 of 2 USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Place Toll Free: (800) 544-2414 Manufacturing. Europe: +44 2392-232392