Model G100N50W4 Flange Mount Termination 100 Watts, 50 Description The G100N50W4 is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant General Specifications Resistive Element Thick Film Features: Substrate AlN Ceramic RoHS Compliant Mounting Flange Nickel Plated Copper 100 Watts Operating Temperature -55 to +150 C (see de rating chart) Tolerance is 0.010, unless otherwise specified. Designed to meet of exceed DC 3 GHz applicable portions of MIL-E-5400. All dimensions in inches. AlN Ceramic Electrical Specifications Non-Nichrome Resistive Resistance Value: 50 Ohms, 2% Element Power: 100 Watts Frequency Range: DC 3.0 GHz Low VSWR 25dB to 2.0 GHz Return Loss 100% Tested 20dB to 3.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing 1 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 +44 2392-232392 Europe: Model G100N50W4 Typical Performance: G100N50W4 G100N50W4 Power De-rating: Mounting Footprint and Procedure: 2 of 2 USA/Canada: (315) 432-8909 Toll Free: (800) 544-2414 Europe: +44 2392-232392