RoHS Compliant Solid State Drive Apacer Professional 2.5 NAS SSD Product Specifications August 4, 2020 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Compliance with SATA Revision 3.2 Temperature Range SATA 6 Gb/s interface Operating: 0C to 70C Backward compatible with SATA 1.5/3 Storage: -40C to 70C Gb/s interfaces Supply Voltage Capacity 5.0 V 5% 128, 256, 512 GB Power Consumption* 1 TB Active mode: 2,100 mW Performance* Idle mode: 335 mW Burst read/write: 600 MB/sec Connector Type Sequential read: Up to 550 MB/sec 7-pin SATA signal connector Sequential write: Up to 500 MB/sec 15-pin SATA power connector Random read (4K): Up to 84,000 IOPS Random write (4K): Up to 86,000 IOPS Form Factor Flash Management 2.5 Dimensions: 100.00 x 69.85 x 6.90, unit: mm Global Wear Leveling Flash bad-block management RoHS Compliant S.M.A.R.T. Warranty: 5 years or TBW (whichever occurs TRIM first) NAND Flash Type: 3D TLC MTBF: >2,000,000 hours Endurance (in Terabytes Written: TBW) 128 GB: 175 TBW 256 GB: 385 TBW 512 GB: 820 TBW 1 TB: 2,065 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. 1 2020 Apacer Technology Inc.