RoHS Recast Compliant M.2 2242 Flash Drive P100-M Product Specifications th November 6 , 2014 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2242 Flash Drive APM2T42P100xxxxAN-XTMX Features: Compliance with SATA Interface Temperature ranges Serial ATA Revision 3.0 Operating: SATA 6.0 Gbps Standard : 0C to 70C ATA-8 command set Extended : -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply voltage Capacities 3.3 V 5% 8, 16, 32, 64, 128, 256 GB Power consumption (typical)* Performance* Active mode: 1,730 mW Interface burst read/write: 600 MB/sec Idle mode: 295 mW Sustained read: up to 520 MB/sec Connector type Sustained write: up to 180 MB/sec 75-pin SATA-based M.2 module pinout Flash Management Form factor Built-in hardware ECC, enabling up to 72 M.2 2242 form factor bit correction per 1K bytes Dimensions: Wear-leveling 42mm(L)x22mm(W)x3.75mm(H) Flash bad-block management S.M.A.R.T. Shock & Vibration** Power Failure Management Shock:1500 G ATA Secure Erase Vibration: 15 G TRIM MTBF: >2,000,000 hours NAND Flash Type: MLC SATA Power Management Device Sleep mode (optional) RoHS Recast compliant *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2014 Apacer Technology Inc. Rev. 1.2