7000 series Rocker and paddle switches Distinctive features Wide variety of actuators Rockers and paddles in different sizes Available in10 different colours Two bezel types 4 terminal types Solder lugs Quick-connect terminals Straight or right angle PC terminals Many mounting styles for panel or PCB Snap-in By plate and screw D PCB mounting with or without bracket 4 contact materials Silver and gold plated silver Gold plated and silver plated brass 8 electrical functions, maintained or momentary UL and CSA approved - for VDE refer to 57000 The company reserves the right to change specifications without notice. D-24 www.apem.com APEM 7000 series Rocker and paddle switches Specifications ELECTRICAL SPECIFICATIONS Current/voltage rating with resistive load : Contact Maximum Minimum Level * Silver A 4A 30VDC 50mA 10VDC III and IV Silver, 4A 30VDC 10mA 50mV I to IV gold plated AD Gold plating withstands up to 100mA 30VDC. 10A 5V Brass, 0,4 VA at 20VAC or DC 10mA 50mV I and II gold plated CD 10A 5V For inductive, lamp or capacitive loads, consult factory. * For details, see technical information, end of catalogue. Initial contact resistance : 10 m Insulation resistance : 1.000 M min. at 500VDC Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 1.500 Vrms 50 Hz min. between poles 1.500 Vrms 50 Hz min. between terminals and frame Contact bounce : 2 ms max. Electrical life : 50.000 cycles at full load MATERIALS GENERAL SPECIFICATIONS D Case : diallylphthalate (DAP) or Low level or mechanical life : 100.000 cycles high temperature plastic material Panel thickness : 1 (.039) to 2,5 mm(.098) (UL94-V0) Operating temperature : -40C to +85C Actuator : polyamide Housing : stainless steel or steel tin plated AGENCY APPROVALS Bracket : steel, tin plated Contacts 3A 250VAC A : silver 6A 125VAC AD : silver, gold plated CD : brass, gold plated Terminal seal : epoxy For VDE, refer to 57000 series. Availability : consult factory for details of approved models. Marking : to order switches marked UL or CSA, complete appropriate box of ordering format. APEM www.apem.com D-25